On Wed, Apr 05, 2017 at 04:17:04PM +0100, Charles Keepax wrote:
On Wed, Apr 05, 2017 at 06:27:13PM +0800, simon.ho.cnxt@gmail.com wrote:
From: Simon Ho simon.ho@conexant.com
Initial commit of Conexant CX20921/CX20924 I2S Audio DSP driver
The CX2092X devices are designed for virtual assisant application need to be always open, listening for users to summon it. There is no any power saving mode support on this device. The processed voice data will be sent to automatic speech recognition (ASR) application for further processing.
Signed-off-by: Simon Ho simon.ho@conexant.com
Just a couple of very minor points.
Thank you for your useful comments, I will fix them.
+static int cx2092x_sendcmd(struct snd_soc_codec *codec,
struct cx2092x_cmd *cmd)+{
- struct cx2092x_priv *cx2092x = snd_soc_codec_get_drvdata(codec);
- int ret = 0;
- int num_32b_words = cmd->num_32b_words;
- unsigned long time_out;
- u32 *i2c_data = (u32 *)cmd;
- int size = num_32b_words + 2;
- /* calculate how many WORD that will be wrote to device*/
- cmd->num_32b_words = cmd->command_id & CX2092X_CMD_GET(0) ?
CX2092X_CMD_SIZE : num_32b_words;- /* write all command data except fo frist 4 bytes*/
- ret = regmap_bulk_write(cx2092x->regmap, 4, &i2c_data[1], size - 1);
- if (ret < 0) {
dev_err(cx2092x->dev, "Failed to write command data\n");goto LEAVE;All caps for a label is a bit unusual probably would be more normal kernel style to make this lower case.
- }
- /* write first 4 bytes command data*/
- ret = regmap_bulk_write(cx2092x->regmap, 0, i2c_data, 1);
- if (ret < 0) {
dev_err(cx2092x->dev, "Failed to write command\n");goto LEAVE;- }
- /* continuously read the first bytes data from device until
* either timeout or the flag 'reply' is set.*/- time_out = msecs_to_jiffies(2000);
- time_out += jiffies;
- do {
regmap_bulk_read(cx2092x->regmap, 0, &i2c_data[0], 1);if (cmd->reply == 1)break;mdelay(10);Do you really want to use mdelay's, they are busy wait loops so thrash the processor, a usleep_range or an msleep might be a more friendly.
Thanks, Charles