This patch adds AE-5 pre-init functions that happen before the main ca0132_alt_init, and gives functions related to the ca0113 a ca0113 prefix instead of ca0132. It also adds functions to write to the 8051's SFRs, and to write the special ca0113 commands for the AE-5.
Signed-off-by: Connor McAdams conmanx360@gmail.com --- sound/pci/hda/patch_ca0132.c | 157 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 134 insertions(+), 23 deletions(-)
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 51af3dc..4b95dc0 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -1483,6 +1483,20 @@ static void chipio_set_conn_rate(struct hda_codec *codec, }
/* + * Writes to the 8051's internal address space directly instead of indirectly, + * giving access to the special function registers located at addresses + * 0x80-0xFF. + */ +static void chipio_8051_write_direct(struct hda_codec *codec, + unsigned int addr, unsigned int data) +{ + unsigned int verb; + + verb = VENDOR_CHIPIO_8051_WRITE_DIRECT | data; + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, verb, addr); +} + +/* * Enable clocks. */ static void chipio_enable_clocks(struct hda_codec *codec) @@ -3117,7 +3131,9 @@ static bool dspload_wait_loaded(struct hda_codec *codec) }
/* - * Setup GPIO for the other variants of Core3D. + * ca0113 related functions. The ca0113 acts as the HDA bus for the pci-e + * based cards, and has a second mmio region, region2, that's used for special + * commands. */
/* @@ -3125,8 +3141,11 @@ static bool dspload_wait_loaded(struct hda_codec *codec) * the mmio address 0x320 is used to set GPIO pins. The format for the data * The first eight bits are just the number of the pin. So far, I've only seen * this number go to 7. + * AE-5 note: The AE-5 seems to use pins 2 and 3 to somehow set the color value + * of the on-card LED. It seems to use pin 2 for data, then toggles 3 to on and + * then off to send that bit. */ -static void ca0132_mmio_gpio_set(struct hda_codec *codec, unsigned int gpio_pin, +static void ca0113_mmio_gpio_set(struct hda_codec *codec, unsigned int gpio_pin, bool enable) { struct ca0132_spec *spec = codec->spec; @@ -3139,6 +3158,54 @@ static void ca0132_mmio_gpio_set(struct hda_codec *codec, unsigned int gpio_pin, }
/* + * Special pci region2 commands that are only used by the AE-5. They follow + * a set format, and require reads at certain points to seemingly 'clear' + * the response data. My first tests didn't do these reads, and would cause + * the card to get locked up until the memory was read. These commands + * seem to work with three distinct values that I've taken to calling group, + * target-id, and value. + */ +static void ca0113_mmio_command_set(struct hda_codec *codec, unsigned int group, + unsigned int target, unsigned int value) +{ + struct ca0132_spec *spec = codec->spec; + unsigned int write_val; + + writel(0x0000007e, spec->mem_base + 0x210); + readl(spec->mem_base + 0x210); + writel(0x0000005a, spec->mem_base + 0x210); + readl(spec->mem_base + 0x210); + readl(spec->mem_base + 0x210); + + writel(0x00800005, spec->mem_base + 0x20c); + writel(group, spec->mem_base + 0x804); + + writel(0x00800005, spec->mem_base + 0x20c); + write_val = (target & 0xff); + write_val |= (value << 8); + + + writel(write_val, spec->mem_base + 0x204); + /* + * Need delay here or else it goes too fast and works inconsistently. + */ + msleep(20); + + readl(spec->mem_base + 0x860); + readl(spec->mem_base + 0x854); + readl(spec->mem_base + 0x840); + + writel(0x00800004, spec->mem_base + 0x20c); + writel(0x00000000, spec->mem_base + 0x210); + readl(spec->mem_base + 0x210); + readl(spec->mem_base + 0x210); +} + +/* + * Setup GPIO for the other variants of Core3D. + */ + +/* * Sets up the GPIO pins so that they are discoverable. If this isn't done, * the card shows as having no GPIO pins. */ @@ -4013,9 +4080,9 @@ static int ca0132_alt_select_out(struct hda_codec *codec) /*speaker out config*/ switch (spec->quirk) { case QUIRK_SBZ: - ca0132_mmio_gpio_set(codec, 7, false); - ca0132_mmio_gpio_set(codec, 4, true); - ca0132_mmio_gpio_set(codec, 1, true); + ca0113_mmio_gpio_set(codec, 7, false); + ca0113_mmio_gpio_set(codec, 4, true); + ca0113_mmio_gpio_set(codec, 1, true); chipio_set_control_param(codec, 0x0D, 0x18); break; case QUIRK_R3DI: @@ -4024,7 +4091,7 @@ static int ca0132_alt_select_out(struct hda_codec *codec) break; case QUIRK_R3D: chipio_set_control_param(codec, 0x0D, 0x24); - ca0132_mmio_gpio_set(codec, 1, true); + ca0113_mmio_gpio_set(codec, 1, true); break; }
@@ -4053,9 +4120,9 @@ static int ca0132_alt_select_out(struct hda_codec *codec) /* Headphone out config*/ switch (spec->quirk) { case QUIRK_SBZ: - ca0132_mmio_gpio_set(codec, 7, true); - ca0132_mmio_gpio_set(codec, 4, true); - ca0132_mmio_gpio_set(codec, 1, false); + ca0113_mmio_gpio_set(codec, 7, true); + ca0113_mmio_gpio_set(codec, 4, true); + ca0113_mmio_gpio_set(codec, 1, false); chipio_set_control_param(codec, 0x0D, 0x12); break; case QUIRK_R3DI: @@ -4064,7 +4131,7 @@ static int ca0132_alt_select_out(struct hda_codec *codec) break; case QUIRK_R3D: chipio_set_control_param(codec, 0x0D, 0x21); - ca0132_mmio_gpio_set(codec, 0x1, false); + ca0113_mmio_gpio_set(codec, 0x1, false); break; }
@@ -4099,9 +4166,9 @@ static int ca0132_alt_select_out(struct hda_codec *codec) /* Surround out config*/ switch (spec->quirk) { case QUIRK_SBZ: - ca0132_mmio_gpio_set(codec, 7, false); - ca0132_mmio_gpio_set(codec, 4, true); - ca0132_mmio_gpio_set(codec, 1, true); + ca0113_mmio_gpio_set(codec, 7, false); + ca0113_mmio_gpio_set(codec, 4, true); + ca0113_mmio_gpio_set(codec, 1, true); chipio_set_control_param(codec, 0x0D, 0x18); break; case QUIRK_R3DI: @@ -4109,7 +4176,7 @@ static int ca0132_alt_select_out(struct hda_codec *codec) r3di_gpio_out_set(codec, R3DI_LINE_OUT); break; case QUIRK_R3D: - ca0132_mmio_gpio_set(codec, 1, true); + ca0113_mmio_gpio_set(codec, 1, true); chipio_set_control_param(codec, 0x0D, 0x24); break; } @@ -4370,7 +4437,7 @@ static int ca0132_alt_select_in(struct hda_codec *codec) switch (spec->quirk) { case QUIRK_SBZ: case QUIRK_R3D: - ca0132_mmio_gpio_set(codec, 0, false); + ca0113_mmio_gpio_set(codec, 0, false); tmp = FLOAT_THREE; break; case QUIRK_R3DI: @@ -4403,7 +4470,7 @@ static int ca0132_alt_select_in(struct hda_codec *codec) switch (spec->quirk) { case QUIRK_SBZ: case QUIRK_R3D: - ca0132_mmio_gpio_set(codec, 0, false); + ca0113_mmio_gpio_set(codec, 0, false); break; case QUIRK_R3DI: r3di_gpio_mic_set(codec, R3DI_REAR_MIC); @@ -4430,8 +4497,8 @@ static int ca0132_alt_select_in(struct hda_codec *codec) switch (spec->quirk) { case QUIRK_SBZ: case QUIRK_R3D: - ca0132_mmio_gpio_set(codec, 0, true); - ca0132_mmio_gpio_set(codec, 5, false); + ca0113_mmio_gpio_set(codec, 0, true); + ca0113_mmio_gpio_set(codec, 5, false); tmp = FLOAT_THREE; break; case QUIRK_R3DI: @@ -6977,11 +7044,11 @@ static void sbz_region2_exit(struct hda_codec *codec) for (i = 0; i < 8; i++) writeb(0xb3, spec->mem_base + 0x304);
- ca0132_mmio_gpio_set(codec, 0, false); - ca0132_mmio_gpio_set(codec, 1, false); - ca0132_mmio_gpio_set(codec, 4, true); - ca0132_mmio_gpio_set(codec, 5, false); - ca0132_mmio_gpio_set(codec, 7, false); + ca0113_mmio_gpio_set(codec, 0, false); + ca0113_mmio_gpio_set(codec, 1, false); + ca0113_mmio_gpio_set(codec, 4, true); + ca0113_mmio_gpio_set(codec, 5, false); + ca0113_mmio_gpio_set(codec, 7, false); }
static void sbz_set_pin_ctl_default(struct hda_codec *codec) @@ -7292,6 +7359,47 @@ static void ca0132_mmio_init(struct hda_codec *codec) }
/* + * This function writes to some SFR's, does some region2 writes, and then + * eventually resets the codec with the 0x7ff verb. Not quite sure why it does + * what it does. + */ +static void ae5_register_set(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + + chipio_8051_write_direct(codec, 0x93, 0x10); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x44); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_PLL_PMU_WRITE, 0xc2); + + writeb(0x0f, spec->mem_base + 0x304); + writeb(0x0f, spec->mem_base + 0x304); + writeb(0x0f, spec->mem_base + 0x304); + writeb(0x0f, spec->mem_base + 0x304); + writeb(0x0e, spec->mem_base + 0x100); + writeb(0x1f, spec->mem_base + 0x304); + writeb(0x0c, spec->mem_base + 0x100); + writeb(0x3f, spec->mem_base + 0x304); + writeb(0x08, spec->mem_base + 0x100); + writeb(0x7f, spec->mem_base + 0x304); + writeb(0x00, spec->mem_base + 0x100); + writeb(0xff, spec->mem_base + 0x304); + + ca0113_mmio_command_set(codec, 0x30, 0x2d, 0x3f); + + chipio_8051_write_direct(codec, 0x90, 0x00); + chipio_8051_write_direct(codec, 0x90, 0x10); + + ca0113_mmio_command_set(codec, 0x48, 0x07, 0x83); + + chipio_write(codec, 0x18b0a4, 0x000000c2); + + snd_hda_codec_write(codec, 0x01, 0, 0x7ff, 0x00); + snd_hda_codec_write(codec, 0x01, 0, 0x7ff, 0x00); +} + +/* * Extra init functions for alternative ca0132 codecs. Done * here so they don't clutter up the main ca0132_init function * anymore than they have to. @@ -7365,6 +7473,9 @@ static int ca0132_init(struct hda_codec *codec)
snd_hda_power_up_pm(codec);
+ if (spec->quirk == QUIRK_AE5) + ae5_register_set(codec); + ca0132_init_unsol(codec); ca0132_init_params(codec); ca0132_init_flags(codec);