Hi, On 3/26/2016 7:10 AM, Ben Zhang wrote:
Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power.
Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly.
Signed-off-by: Ben Zhang benzh@chromium.org
sound/soc/codecs/nau8825.c | 126 +++++++++++++++++++++++++-------------------- 1 file changed, 71 insertions(+), 55 deletions(-)
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 3e7bee2..cb08a35 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -343,9 +343,12 @@ static const struct snd_soc_dapm_widget nau8825_dapm_widgets[] = { SND_SOC_DAPM_SUPPLY("ADC Power", NAU8825_REG_ANALOG_ADC_2, 6, 0, NULL, 0),
- /* ADC for button press detection */
- SND_SOC_DAPM_ADC("SAR", NULL, NAU8825_REG_SAR_CTRL,
NAU8825_SAR_ADC_EN_SFT, 0),
/* ADC for button press detection. A dapm supply widget is used to
* prevent dapm_power_widgets keeping the codec at SND_SOC_BIAS_ON* during suspend.*/SND_SOC_DAPM_SUPPLY("SAR", NAU8825_REG_SAR_CTRL,
NAU8825_SAR_ADC_EN_SFT, 0, NULL, 0),SND_SOC_DAPM_PGA_S("ADACL", 2, NAU8825_REG_RDAC, 12, 0, NULL, 0), SND_SOC_DAPM_PGA_S("ADACR", 2, NAU8825_REG_RDAC, 13, 0, NULL, 0),
@@ -607,6 +610,16 @@ static bool nau8825_is_jack_inserted(struct regmap *regmap)
static void nau8825_restart_jack_detection(struct regmap *regmap) {
- /* Chip needs one FSCLK cycle in order to generate interrupts,
* as we cannot guarantee one will be provided by the system. Turning* master mode on then off enables us to generate that FSCLK cycle* with a minimum of contention on the clock bus.*/- regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER);- regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE);- /* this will restart the entire jack detection process including MIC/GND
- switching and create interrupts. We have to go from 0 to 1 and back
- to 0 to restart.
@@ -728,7 +741,10 @@ static irqreturn_t nau8825_interrupt(int irq, void *data) struct regmap *regmap = nau8825->regmap; int active_irq, clear_irq = 0, event = 0, event_mask = 0;
- regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq);
if (regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq)) {
dev_err(nau8825->dev, "failed to read irq status\n");return IRQ_NONE;}
if ((active_irq & NAU8825_JACK_EJECTION_IRQ_MASK) == NAU8825_JACK_EJECTION_DETECTED) {
@@ -1198,33 +1214,74 @@ static int nau8825_set_bias_level(struct snd_soc_codec *codec, return ret; } }
ret = regcache_sync(nau8825->regmap);if (ret) {dev_err(codec->dev,"Failed to sync cache: %d\n", ret);return ret;}}
break;
case SND_SOC_BIAS_OFF: if (nau8825->mclk_freq) clk_disable_unprepare(nau8825->mclk);
regcache_mark_dirty(nau8825->regmap);break; } return 0;
}
The bias off case will never be touched. Need to force bias off to make it done.
+#ifdef CONFIG_PM +static int nau8825_suspend(struct snd_soc_codec *codec) +{
- struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec);
- disable_irq(nau8825->irq);
- regcache_cache_only(nau8825->regmap, true);
- regcache_mark_dirty(nau8825->regmap);
- return 0;
+}
+static int nau8825_resume(struct snd_soc_codec *codec) +{
- struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec);
- /* The chip may lose power and reset in S3. regcache_sync restores
* register values including configurations for sysclk, irq, and* jack/button detection.*/- regcache_cache_only(nau8825->regmap, false);
- regcache_sync(nau8825->regmap);
- /* Check the jack plug status directly. If the headset is unplugged
* during S3 when the chip has no power, there will be no jack* detection irq even after the nau8825_restart_jack_detection below,* because the chip just thinks no headset has ever been plugged in.*/- if (!nau8825_is_jack_inserted(nau8825->regmap)) {
nau8825_eject_jack(nau8825);snd_soc_jack_report(nau8825->jack, 0, SND_JACK_HEADSET);- }
- enable_irq(nau8825->irq);
- /* Run jack detection to check the type (OMTP or CTIA) of the headset
* if there is one. This handles the case where a different type of* headset is plugged in during S3. This triggers an IRQ iff a headset* is already plugged in.*/- nau8825_restart_jack_detection(nau8825->regmap);
- return 0;
+}
I'm afraid the machine has not enabled the system clock in codec at this moment and cache sync not bring the internal clock or FLL back. Thus, the jack detection maybe fails without clock to debounce.
+#else +#define nau8825_suspend NULL +#define nau8825_resume NULL +#endif
static struct snd_soc_codec_driver nau8825_codec_driver = { .probe = nau8825_codec_probe, .set_sysclk = nau8825_set_sysclk, .set_pll = nau8825_set_pll, .set_bias_level = nau8825_set_bias_level, .suspend_bias_off = true,
.suspend = nau8825_suspend,
.resume = nau8825_resume,
.controls = nau8825_controls, .num_controls = ARRAY_SIZE(nau8825_controls),
@@ -1334,16 +1391,6 @@ static int nau8825_setup_irq(struct nau8825 *nau8825) regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_DACR, NAU8825_ENABLE_DACR);
- /* Chip needs one FSCLK cycle in order to generate interrupts,
* as we cannot guarantee one will be provided by the system. Turning* master mode on then off enables us to generate that FSCLK cycle* with a minimum of contention on the clock bus.*/- regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER);- regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE);- ret = devm_request_threaded_irq(nau8825->dev, nau8825->irq, NULL, nau8825_interrupt, IRQF_TRIGGER_LOW | IRQF_ONESHOT, "nau8825", nau8825);
@@ -1411,36 +1458,6 @@ static int nau8825_i2c_remove(struct i2c_client *client) return 0; }
-#ifdef CONFIG_PM_SLEEP -static int nau8825_suspend(struct device *dev) -{
- struct i2c_client *client = to_i2c_client(dev);
- struct nau8825 *nau8825 = dev_get_drvdata(dev);
- disable_irq(client->irq);
- regcache_cache_only(nau8825->regmap, true);
- regcache_mark_dirty(nau8825->regmap);
- return 0;
-}
-static int nau8825_resume(struct device *dev) -{
- struct i2c_client *client = to_i2c_client(dev);
- struct nau8825 *nau8825 = dev_get_drvdata(dev);
- regcache_cache_only(nau8825->regmap, false);
- regcache_sync(nau8825->regmap);
- enable_irq(client->irq);
- return 0;
-} -#endif
-static const struct dev_pm_ops nau8825_pm = {
- SET_SYSTEM_SLEEP_PM_OPS(nau8825_suspend, nau8825_resume)
-};
static const struct i2c_device_id nau8825_i2c_ids[] = { { "nau8825", 0 }, { } @@ -1467,7 +1484,6 @@ static struct i2c_driver nau8825_driver = { .name = "nau8825", .of_match_table = of_match_ptr(nau8825_of_ids), .acpi_match_table = ACPI_PTR(nau8825_acpi_match),
.pm = &nau8825_pm,