Hi Lars,
On Fri, Mar 07, 2014 at 06:12:33PM +0100, Lars-Peter Clausen wrote:
On 03/07/2014 05:53 PM, Maxime Ripard wrote:
Hi Liam, Mark,
I have a sound IP that is part of an SoC that I'm willing to write a driver for.
Which SoC is this?
Allwinner A31.
Unfortunately, the datasheet for this SoC is not public, but most of the other Allwinner SoCs have an IP that behaves pretty much in the same way.
You can find a datasheet for the A20 here: http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf, starting page 172.
The A31 has a slightly different IP, but from an architectural standpoint, it's pretty much the same thing.
This IP is made of a few registers to control the sampling rate, if we're using mono/stereo, plus two fifos, one for playback, one for capture, that can be seed with data. The data are then taken, go through a DAC, and the outer interface of the IP are directly analog signals (so the DAC/ADC are directly in the SoC, and the only interface we have is plain registers).
From what I understood from ASoC, you have mostly three components, the DAI, the codec and the platform that plumbers the two first together. Here, my understanding is that it's pretty much the whole three in a single IP.
The platform component usually takes care of transferring data from memory to your IP. It sounds as if this is still separate on your platform. Quite possibly you can use the generic dmaengine PCM driver.
You really have two intertwined sets of registers, one for the FIFO themselves (and you will obviously use DMA for that, I'll keep in mind the dmaengine PCM driver), and the control registers, so you can't really split it into two separate drivers (at least, not easily).
Right now ASoC expects you to specify a DAI link for a PCM device. The DAI link connects the DAIs of two components typically the SoC side and a external CODEC. In your case you do not have the external CODEC. You can solve this by using a dummy CODEC or splitting things up and register both the CODEC and the CPU DAI from the same driver.
That would probably be the best solution, yes.
But I'm currently working on a patchset that will eventually allow these kind of devices to be supported more naturally. It will allow to register them as one component that won't need the CODEC component to work.
Great! Do you have a branch with that work somewhere?
Should such a hardware block be handled into ASoC, and if yes, how? If not, which other framework should be used?
It makes sense to use ASoC if there are components where the driver can be shared e.g. the DMA in your case. Otherwise you can also use plain old ALSA.
The DMA controller this IP will use is a system-wide DMA master, so I don't think this driver will provide something to other drivers.
Thanks! Maxime