Re: [PATCH 7/7] arm64: dts: qcom: Add SM8550 Xperia 1 V

W dniu 2024-02-12 14:10, Konrad Dybcio napisał(a):

Add support for Sony Xperia 1 V, a.k.a PDX234. This device is a part of the SoMC SM8550 Yodo platform.

This commit brings support for:

• Remoteprocs (sans modem for now)
• Flash LED (the notification LED is gone :((((()
• SD Card
• USB (*including SuperSpeed*) + PMIC_GLINK (it's funky, requires a

replug with an cable flip sometimes..)

• Most regulators
• Part of I2C-connected peripherals (notably no touch due to a

driver bug)

• PCIe0 (PCIe1 is unused)

Do note display via simplefb is not supported, as the display is blanked upon exiting XBL.

I also noticed such behaviour on my S24 Ultra. I was pointed out by Xilin Wu that on SM8450 or newer, the display will be turned off by the bootloader if the node '/reserved-memory/splash_region' does not exist in the device tree. Adding it in the device tree for my phone made the bootloader leave the display on. Maybe it's the same case here?

https://git.codelinaro.org/clo/la/abl/tianocore/edk2/-/blob/LA.VENDOR.1.0.r2...

To create a working boot image, you need to run: cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/sm8550-sony-xperia-\ yodo-pdx234.dtb > .Image.gz-dtb

mkbootimg \ --kernel .Image.gz-dtb \ --ramdisk some_initrd.img \ --pagesize 4096 \ --base 0x0 \ --kernel_offset 0x8000 \ --ramdisk_offset 0x1000000 \ --tags_offset 0x100 \ --cmdline "SOME_CMDLINE" \ --dtb_offset 0x1f00000 \ --header_version 2 \ -o boot.img-sony-xperia-pdx234

Then, you need to flash it on the device and get rid of all the vendor_boot/dtbo mess:

// You have to either pull vbmeta{"","_system"} from // /dev/block/bootdevice/by-name/ or build one as a part of AOSP build process fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img fastboot --disable-verity --disable-verification flash vbmeta_system \ vbmeta_system.img

fastboot flash boot boot.img-sony-xperia-pdx234 fastboot erase vendor_boot fastboot erase recovery fastboot flash dtbo emptydtbo.img fastboot erase init_boot // ? I don't remember if it's necessary, sorry fastboot continue

Where emptydtbo.img is a tiny file that consists of 2 bytes (all zeroes), doing a "fastboot erase" won't cut it, the bootloader will go crazy and things will fall apart when it tries to overlay random bytes from an empty partition onto a perfectly good appended DTB.

Signed-off-by: Konrad Dybcio konrad.dybcio@linaro.org

arch/arm64/boot/dts/qcom/Makefile | 1 + .../dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts | 779 +++++++++++++++++++++ 2 files changed, 780 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index f7c5662213e4..9bbea531660d 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -237,6 +237,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8550-sony-xperia-yodo-pdx234.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb diff --git a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts new file mode 100644 index 000000000000..85e0d3d66e16 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts @@ -0,0 +1,779 @@ +// SPDX-License-Identifier: BSD-3-Clause +/*

• • Copyright (c) 2023, Linaro Limited
• */

+/dts-v1/;

+#include <dt-bindings/firmware/qcom,scm.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/sound/cs35l45.h> +#include "sm8550.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#define PMK8550VE_SID 5 +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" +/* TODO: Only one SID of PMR735D seems accessible? */

+/delete-node/ &hwfence_shbuf; +/delete-node/ &mpss_mem; +/delete-node/ &rmtfs_mem; +/ {

• model = "Sony Xperia 1 V";
• compatible = "sony,pdx234", "qcom,sm8550";
• chassis-type = "handset";
• aliases {

• i2c0 = &i2c0;
  

• i2c4 = &i2c4;
  

• i2c10 = &i2c10;
  

• i2c11 = &i2c11;
  

• i2c16 = &i2c_hub_2;
  

• serial0 = &uart7;
  

• };
• chosen {

• stdout-path = "serial0:115200n8";
  

• };
• gpio-keys {

• compatible = "gpio-keys";
  

• label = "gpio-keys";
  

• pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
  

• pinctrl-names = "default";
  

• key-camera-focus {
  

• 	label = "Camera Focus";
  

• 	linux,code = <KEY_CAMERA_FOCUS>;
  

• 	gpios = <&pm8550b_gpios 8 GPIO_ACTIVE_LOW>;
  

• 	debounce-interval = <15>;
  

• 	linux,can-disable;
  

• 	wakeup-source;
  

• };
  

• key-camera-snapshot {
  

• 	label = "Camera Snapshot";
  

• 	gpios = <&pm8550b_gpios 7 GPIO_ACTIVE_LOW>;
  

• 	linux,code = <KEY_CAMERA>;
  

• 	debounce-interval = <15>;
  

• 	linux,can-disable;
  

• 	wakeup-source;
  

• };
  

• key-volume-down {
  

• 	label = "Volume Down";
  

• 	linux,code = <KEY_VOLUMEDOWN>;
  

• 	gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
  

• 	debounce-interval = <15>;
  

• 	linux,can-disable;
  

• 	wakeup-source;
  

• };
  

• };
• pmic-glink {

• compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
  

• orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
  

• #address-cells = <1>;
  

• #size-cells = <0>;
  

• connector@0 {
  

• 	compatible = "usb-c-connector";
  

• 	reg = <0>;
  

• 	power-role = "dual";
  

• 	data-role = "dual";
  

• 	ports {
  

• 		#address-cells = <1>;
  

• 		#size-cells = <0>;
  

• 		port@0 {
  

• 			reg = <0>;
  

• 			pmic_glink_hs_in: endpoint {
  

• 				remote-endpoint = <&usb_1_dwc3_hs>;
  

• 			};
  

• 		};
  

• 		port@1 {
  

• 			reg = <1>;
  

• 			pmic_glink_ss_in: endpoint {
  

• 				remote-endpoint = <&usb_dp_qmpphy_out>;
  

• 			};
  

• 		};
  

• 	};
  

• };
  

• };
• reserved-memory {

• mpss_mem: mpss-region@89800000 {
  

• 	reg = <0x0 0x89800000 0x0 0x10800000>;
  

• 	no-map;
  

• };
  

• splash@b8000000 {
  

• 	reg = <0x0 0xb8000000 0x0 0x2b00000>;
  

• 	no-map;
  

• };
  

• hwfence_shbuf: hwfence-shbuf-region@e6440000 {
  

• 	reg = <0x0 0xe6440000 0x0 0x2dd000>;
  

• 	no-map;
  

• };
  

• rmtfs_mem: memory@f8b00000 {
  

• 	compatible = "qcom,rmtfs-mem";
  

• 	reg = <0x0 0xf8b00000 0x0 0x280000>;
  

• 	no-map;
  

• 	qcom,client-id = <1>;
  

• 	qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
  

• };
  

• ramoops@ffd00000 {
  

• 	compatible = "ramoops";
  

• 	reg = <0x0 0xffd00000 0x0 0xc0000>;
  

• 	console-size = <0x40000>;
  

• 	record-size = <0x1000>;
  

• 	pmsg-size = <0x40000>;
  

• 	ecc-size = <16>;
  

• };
  

• rdtag-store-region@ffdc0000 {
  

• 	reg = <0x0 0xffdc0000 0x0 0x40000>;
  

• 	no-map;
  

• };
  

• };
• vph_pwr: vph-pwr-regulator {

• compatible = "regulator-fixed";
  

• regulator-name = "vph_pwr";
  

• regulator-min-microvolt = <3700000>;
  

• regulator-max-microvolt = <3700000>;
  

• regulator-always-on;
  

• regulator-boot-on;
  

• };

+};

+&apps_rsc {

• regulators-0 {

• compatible = "qcom,pm8550-rpmh-regulators";
  

• qcom,pmic-id = "b";
  

• pm8550_bob1: bob1 {
  

• 	regulator-name = "pm8550_bob1";
  

• 	regulator-min-microvolt = <3416000>;
  

• 	regulator-max-microvolt = <3960000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• /* TODO: bob2 @ 2.704-3.008V doesn't fall into the vreg driver 
  

constraints */

• pm8550_l1: ldo1 {
  

• 	regulator-name = "pm8550_l1";
  

• 	regulator-min-microvolt = <1800000>;
  

• 	regulator-max-microvolt = <1800000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550_l2: ldo2 {
  

• 	regulator-name = "pm8550_l2";
  

• 	regulator-min-microvolt = <3008000>;
  

• 	regulator-max-microvolt = <3008000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• /* L4 exists in cmd-db, but the board seems to crash on access */
  

• pm8550_l5: ldo5 {
  

• 	regulator-name = "pm8550_l5";
  

• 	regulator-min-microvolt = <3104000>;
  

• 	regulator-max-microvolt = <3104000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550_l6: ldo6 {
  

• 	regulator-name = "pm8550_l6";
  

• 	regulator-min-microvolt = <1800000>;
  

• 	regulator-max-microvolt = <3008000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550_l7: ldo7 {
  

• 	regulator-name = "pm8550_l7";
  

• 	regulator-min-microvolt = <1800000>;
  

• 	regulator-max-microvolt = <3008000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550_l8: ldo8 {
  

• 	regulator-name = "pm8550_l8";
  

• 	regulator-min-microvolt = <1800000>;
  

• 	regulator-max-microvolt = <3008000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550_l9: ldo9 {
  

• 	regulator-name = "pm8550_l9";
  

• 	regulator-min-microvolt = <2960000>;
  

• 	regulator-max-microvolt = <3008000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550_l10: ldo10 {
  

• 	regulator-name = "pm8550_l10";
  

• 	regulator-min-microvolt = <1800000>;
  

• 	regulator-max-microvolt = <1800000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550_l11: ldo11 {
  

• 	regulator-name = "pm8550_l11";
  

• 	regulator-min-microvolt = <1200000>;
  

• 	regulator-max-microvolt = <1504000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550_l12: ldo12 {
  

• 	regulator-name = "pm8550_l12";
  

• 	regulator-min-microvolt = <1800000>;
  

• 	regulator-max-microvolt = <1800000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550_l13: ldo13 {
  

• 	regulator-name = "pm8550_l13";
  

• 	regulator-min-microvolt = <3000000>;
  

• 	regulator-max-microvolt = <3000000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550_l14: ldo14 {
  

• 	regulator-name = "pm8550_l14";
  

• 	regulator-min-microvolt = <3304000>;
  

• 	regulator-max-microvolt = <3304000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550_l15: ldo15 {
  

• 	regulator-name = "pm8550_l15";
  

• 	regulator-min-microvolt = <1800000>;
  

• 	regulator-max-microvolt = <1800000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550_l16: ldo16 {
  

• 	regulator-name = "pm8550_l16";
  

• 	regulator-min-microvolt = <2800000>;
  

• 	regulator-max-microvolt = <2800000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550_l17: ldo17 {
  

• 	regulator-name = "pm8550_l17";
  

• 	regulator-min-microvolt = <2504000>;
  

• 	regulator-max-microvolt = <2504000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• };
• regulators-1 {

• compatible = "qcom,pm8550vs-rpmh-regulators";
  

• qcom,pmic-id = "c";
  

• pm8550vs_0_l1: ldo1 {
  

• 	regulator-name = "pm8550vs_0_l1";
  

• 	regulator-min-microvolt = <1200000>;
  

• 	regulator-max-microvolt = <1200000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550vs_0_l3: ldo3 {
  

• 	regulator-name = "pm8550vs_0_l3";
  

• 	regulator-min-microvolt = <880000>;
  

• 	regulator-max-microvolt = <912000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• };
• regulators-2 {

• compatible = "qcom,pm8550vs-rpmh-regulators";
  

• qcom,pmic-id = "d";
  

• pm8550vs_1_l1: ldo1 {
  

• 	regulator-name = "pm8550vs_1_l1";
  

• 	regulator-min-microvolt = <880000>;
  

• 	regulator-max-microvolt = <920000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• /* L3 exists in cmd-db, but the board seems to crash on access */
  

• };
• regulators-3 {

• compatible = "qcom,pm8550vs-rpmh-regulators";
  

• qcom,pmic-id = "e";
  

• pm8550vs_2_s4: smps4 {
  

• 	regulator-name = "pm8550vs_2_s4";
  

• 	regulator-min-microvolt = <904000>;
  

• 	regulator-max-microvolt = <984000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550vs_2_s5: smps5 {
  

• 	regulator-name = "pm8550vs_2_s5";
  

• 	regulator-min-microvolt = <1010000>;
  

• 	regulator-max-microvolt = <1120000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550vs_2_l1: ldo1 {
  

• 	regulator-name = "pm8550vs_2_l1";
  

• 	regulator-min-microvolt = <880000>;
  

• 	regulator-max-microvolt = <912000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550vs_2_l2: ldo2 {
  

• 	regulator-name = "pm8550vs_2_l2";
  

• 	regulator-min-microvolt = <880000>;
  

• 	regulator-max-microvolt = <968000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550vs_2_l3: ldo3 {
  

• 	regulator-name = "pm8550vs_2_l3";
  

• 	regulator-min-microvolt = <1200000>;
  

• 	regulator-max-microvolt = <1200000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• };
• regulators-4 {

• compatible = "qcom,pm8550ve-rpmh-regulators";
  

• qcom,pmic-id = "f";
  

• pm8550ve_s4: smps4 {
  

• 	regulator-name = "pm8550ve_s4";
  

• 	regulator-min-microvolt = <500000>;
  

• 	regulator-max-microvolt = <700000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550ve_l1: ldo1 {
  

• 	regulator-name = "pm8550ve_l1";
  

• 	regulator-min-microvolt = <912000>;
  

• 	regulator-max-microvolt = <912000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550ve_l2: ldo2 {
  

• 	regulator-name = "pm8550ve_l2";
  

• 	regulator-min-microvolt = <880000>;
  

• 	regulator-max-microvolt = <912000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550ve_l3: ldo3 {
  

• 	regulator-name = "pm8550ve_l3";
  

• 	regulator-min-microvolt = <912000>;
  

• 	regulator-max-microvolt = <912000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• };
• regulators-5 {

• compatible = "qcom,pm8550vs-rpmh-regulators";
  

• qcom,pmic-id = "g";
  

• pm8550vs_3_s1: smps1 {
  

• 	regulator-name = "pm8550vs_3_s1";
  

• 	regulator-min-microvolt = <1200000>;
  

• 	regulator-max-microvolt = <1300000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550vs_3_s2: smps2 {
  

• 	regulator-name = "pm8550vs_3_s2";
  

• 	regulator-min-microvolt = <500000>;
  

• 	regulator-max-microvolt = <1036000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550vs_3_s3: smps3 {
  

• 	regulator-name = "pm8550vs_3_s3";
  

• 	regulator-min-microvolt = <300000>;
  

• 	regulator-max-microvolt = <1004000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550vs_3_s4: smps4 {
  

• 	regulator-name = "pm8550vs_3_s4";
  

• 	regulator-min-microvolt = <1200000>;
  

• 	regulator-max-microvolt = <1352000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550vs_3_s5: smps5 {
  

• 	regulator-name = "pm8550vs_3_s5";
  

• 	regulator-min-microvolt = <500000>;
  

• 	regulator-max-microvolt = <1004000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550vs_3_s6: smps6 {
  

• 	regulator-name = "pm8550vs_3_s6";
  

• 	regulator-min-microvolt = <1800000>;
  

• 	regulator-max-microvolt = <2000000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550vs_3_l1: ldo1 {
  

• 	regulator-name = "pm8550vs_3_l1";
  

• 	regulator-min-microvolt = <1144000>;
  

• 	regulator-max-microvolt = <1256000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550vs_3_l2: ldo2 {
  

• 	regulator-name = "pm8550vs_3_l2";
  

• 	regulator-min-microvolt = <1104000>;
  

• 	regulator-max-microvolt = <1200000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• pm8550vs_3_l3: ldo3 {
  

• 	regulator-name = "pm8550vs_3_l3";
  

• 	regulator-min-microvolt = <1200000>;
  

• 	regulator-max-microvolt = <1200000>;
  

• 	regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  

• };
  

• };
• /* TODO: Unknown PMIC @ k, l, PM8010 @ m, n */

+};

+&gpi_dma1 {

• status = "okay";

+};

+&gpi_dma2 {

• status = "okay";

+};

+&i2c_hub_2 {

• clock-frequency = <400000>;
• status = "okay";
• pmic@75 {

• compatible = "dlg,slg51000";
  

• reg = <0x75>;
  

• dlg,cs-gpios = <&pm8550vs_g_gpios 4 GPIO_ACTIVE_HIGH>;
  

• pinctrl-0 = <&cam_pwr_a_cs>;
  

• pinctrl-names = "default";
  

• regulators {
  

• 	slg51000_a_ldo1: ldo1 {
  

• 		regulator-name = "slg51000_a_ldo1";
  

• 		regulator-min-microvolt = <2400000>;
  

• 		regulator-max-microvolt = <3300000>;
  

• 	};
  

• 	slg51000_a_ldo2: ldo2 {
  

• 		regulator-name = "slg51000_a_ldo2";
  

• 		regulator-min-microvolt = <2400000>;
  

• 		regulator-max-microvolt = <3300000>;
  

• 	};
  

• 	slg51000_a_ldo3: ldo3 {
  

• 		regulator-name = "slg51000_a_ldo3";
  

• 		regulator-min-microvolt = <1200000>;
  

• 		regulator-max-microvolt = <3750000>;
  

• 	};
  

• 	slg51000_a_ldo4: ldo4 {
  

• 		regulator-name = "slg51000_a_ldo4";
  

• 		regulator-min-microvolt = <1200000>;
  

• 		regulator-max-microvolt = <3750000>;
  

• 	};
  

• 	slg51000_a_ldo5: ldo5 {
  

• 		regulator-name = "slg51000_a_ldo5";
  

• 		regulator-min-microvolt = <500000>;
  

• 		regulator-max-microvolt = <1200000>;
  

• 	};
  

• 	slg51000_a_ldo6: ldo6 {
  

• 		regulator-name = "slg51000_a_ldo6";
  

• 		regulator-min-microvolt = <500000>;
  

• 		regulator-max-microvolt = <1200000>;
  

• 	};
  

• 	slg51000_a_ldo7: ldo7 {
  

• 		regulator-name = "slg51000_a_ldo7";
  

• 		regulator-min-microvolt = <1200000>;
  

• 		regulator-max-microvolt = <3750000>;
  

• 	};
  

• };
  

• };

+};

+&i2c_master_hub_0 {

• status = "okay";

+};

+&i2c0 {

• clock-frequency = <1000000>;
• status = "okay";
• /* NXP NFC @ 28 */

+};

+&i2c4 {

• clock-frequency = <400000>;
• status = "okay";
• /* LX Semi SW82907 touchscreen @ 28 */

+};

+&i2c10 {

• clock-frequency = <1000000>;
• status = "okay";
• /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */

+};

+&i2c11 {

• clock-frequency = <1000000>;
• status = "okay";
• cs35l41_l: speaker-amp@30 {

• compatible = "cirrus,cs35l45";
  

• reg = <0x30>;
  

• interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
  

• reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
  

• cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | 
  

CS35L45_ASP_TX_HIZ_DISABLED)>;

• #sound-dai-cells = <1>;
  

• cirrus,gpio-ctrl2 {
  

• 	gpio-ctrl = <0x2>;
  

• };
  

• };
• cs35l41_r: speaker-amp@31 {

• compatible = "cirrus,cs35l45";
  

• reg = <0x31>;
  

• interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
  

• reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
  

• cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | 
  

CS35L45_ASP_TX_HIZ_DISABLED)>;

• #sound-dai-cells = <1>;
  

• cirrus,gpio-ctrl2 {
  

• 	gpio-ctrl = <0x2>;
  

• };
  

• };

+};

+&pcie0 {

• wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
• perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
• pinctrl-0 = <&pcie0_default_state>;
• pinctrl-names = "default";
• status = "okay";

+};

+&pcie0_phy {

• vdda-phy-supply = <&pm8550vs_2_l1>;
• vdda-pll-supply = <&pm8550vs_2_l3>;
• status = "okay";

+};

+&pm8550_flash {

• status = "okay";
• led-0 {

• function = LED_FUNCTION_FLASH;
  

• color = <LED_COLOR_ID_WHITE>;
  

• led-sources = <1>, <4>;
  

• led-max-microamp = <500000>;
  

• flash-max-microamp = <1000000>;
  

• flash-max-timeout-us = <1280000>;
  

• function-enumerator = <0>;
  

• };
• led-1 {

• function = LED_FUNCTION_FLASH;
  

• color = <LED_COLOR_ID_YELLOW>;
  

• led-sources = <2>, <3>;
  

• led-max-microamp = <500000>;
  

• flash-max-microamp = <1000000>;
  

• flash-max-timeout-us = <1280000>;
  

• function-enumerator = <1>;
  

• };

+};

+&pm8550_gpios {

• vol_down_n: volume-down-n-state {

• pins = "gpio6";
  

• function = "normal";
  

• power-source = <1>;
  

• bias-pull-up;
  

• input-enable;
  

• };
• sdc2_card_det_n: sd-card-det-n-state {

• pins = "gpio12";
  

• function = "normal";
  

• power-source = <1>;
  

• bias-pull-down;
  

• output-disable;
  

• input-enable;
  

• };

+};

+&pm8550b_gpios {

• snapshot_n: snapshot-n-state {

• pins = "gpio7";
  

• function = "normal";
  

• power-source = <1>;
  

• bias-pull-up;
  

• input-enable;
  

• };
• focus_n: focus-n-state {

• pins = "gpio8";
  

• function = "normal";
  

• power-source = <1>;
  

• bias-pull-up;
  

• input-enable;
  

• };

+};

+&pm8550vs_g_gpios {

• cam_pwr_a_cs: cam-pwr-a-cs-state {

• pins = "gpio4";
  

• function = "normal";
  

• power-source = <0x01>;
  

• drive-push-pull;
  

• output-low;
  

• qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
  

• };

+};

+&pm8550b_eusb2_repeater {

• qcom,tune-usb2-disc-thres = /bits/ 8 <0x6>;
• qcom,tune-usb2-amplitude = /bits/ 8 <0xf>;
• qcom,tune-usb2-preem = /bits/ 8 <0x7>;
• vdd18-supply = <&pm8550_l15>;
• vdd3-supply = <&pm8550_l5>;

+};

+&pon_pwrkey {

• status = "okay";

+};

+&pon_resin {

• linux,code = <KEY_VOLUMEUP>;
• status = "okay";

+};

+&qupv3_id_0 {

• status = "okay";

+};

+&qupv3_id_1 {

• status = "okay";

+};

+&remoteproc_adsp {

• firmware-name = "qcom/sm8550/Sony/yodo/adsp.mbn",

• 	"qcom/sm8550/Sony/yodo/adsp_dtb.mbn";
  

• status = "okay";

+};

+&remoteproc_cdsp {

• firmware-name = "qcom/sm8550/Sony/yodo/cdsp.mbn",

• 	"qcom/sm8550/Sony/yodo/cdsp_dtb.mbn";
  

• status = "okay";

+};

+&sdhc_2 {

• cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>;
• pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
• pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
• pinctrl-names = "default", "sleep";
• vmmc-supply = <&pm8550_l9>;
• vqmmc-supply = <&pm8550_l8>;
• no-sdio;
• no-mmc;
• status = "okay";

+};

+&sleep_clk {

• clock-frequency = <32000>;

+};

+&tlmm {

• gpio-reserved-ranges = <32 8>;

+};

+&uart7 {

• status = "okay";

+};

+&usb_1 {

• status = "okay";

+};

+&usb_1_dwc3 {

• dr_mode = "otg";
• usb-role-switch;

+};

+&usb_1_dwc3_hs {

• remote-endpoint = <&pmic_glink_hs_in>;

+};

+&usb_1_dwc3_ss {

• remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;

+};

+&usb_1_hsphy {

• vdd-supply = <&pm8550vs_2_l1>;
• vdda12-supply = <&pm8550vs_2_l3>;
• phys = <&pm8550b_eusb2_repeater>;
• status = "okay";

+};

+&usb_dp_qmpphy {

• vdda-phy-supply = <&pm8550vs_2_l3>;
• vdda-pll-supply = <&pm8550ve_l3>;
• orientation-switch;
• status = "okay";

+};

+&usb_dp_qmpphy_out {

• remote-endpoint = <&pmic_glink_ss_in>;

+};

+&usb_dp_qmpphy_usb_ss_in {

• remote-endpoint = <&usb_1_dwc3_ss>;

+};

+&xo_board {

• clock-frequency = <76800000>;

+};