Re: [PATCH v26 29/33] ALSA: usb-audio: qcom: Don't allow USB offload path if PCM device is in use

On 8/29/24 21:41, Wesley Cheng wrote:

Add proper checks and updates to the USB substream once receiving a USB QMI stream enable request. If the substream is already in use from the non offload path, reject the stream enable request. In addition, update the USB substream opened parameter when enabling the offload path, so the non offload path can be blocked.

Signed-off-by: Wesley Cheng quic_wcheng@quicinc.com

sound/usb/qcom/qc_audio_offload.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/sound/usb/qcom/qc_audio_offload.c b/sound/usb/qcom/qc_audio_offload.c index e9f2fd6bbb41..0bd533f539e4 100644 --- a/sound/usb/qcom/qc_audio_offload.c +++ b/sound/usb/qcom/qc_audio_offload.c @@ -1482,12 +1482,17 @@ static void handle_uaudio_stream_req(struct qmi_handle *handle, goto response; }

• mutex_lock(&chip->mutex); if (req_msg->enable) {

• if (info_idx < 0 || chip->system_suspend) {
  

• if (info_idx < 0 || chip->system_suspend || subs->opened) {
  ret = -EBUSY;
  

• 	mutex_unlock(&chip->mutex);
  

• goto response;
  

  }

• subs->opened = 1;
  

  }

• mutex_unlock(&chip->mutex);

  if (req_msg->service_interval_valid) { ret = get_data_interval_from_si(subs,

@@ -1509,6 +1514,11 @@ static void handle_uaudio_stream_req(struct qmi_handle *handle, if (!ret) ret = prepare_qmi_response(subs, req_msg, &resp, info_idx);

• if (ret < 0) {
  

• 	mutex_lock(&chip->mutex);
  

• 	subs->opened = 0;
  

• 	mutex_unlock(&chip->mutex);
  

• }
  

  } else { info = &uadev[pcm_card_num].info[info_idx]; if (info->data_ep_pipe) {

@@ -1532,6 +1542,9 @@ static void handle_uaudio_stream_req(struct qmi_handle *handle, }

disable_audio_stream(subs);

• mutex_lock(&chip->mutex);
  

• subs->opened = 0;
  

• mutex_unlock(&chip->mutex);
  

  }

This sounds ok but I wonder why all this needs to be done in Qualcomm-specific layers instead of soc-usb?