I forget to attach the lspci -nv output as required in the Documentation, sorry, here it is.
00:00.0 0600: 8086:2a00 (rev 0c) Subsystem: 104d:9005 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information
00:02.0 0300: 8086:2a02 (rev 0c) (prog-if 00 [VGA]) Subsystem: 104d:9005 Flags: bus master, fast devsel, latency 0, IRQ 5 Memory at fc000000 (64-bit, non-prefetchable) [size=1M] Memory at d0000000 (64-bit, prefetchable) [size=256M] I/O ports at 1800 [size=8] Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Capabilities: [d0] Power Management version 3
00:02.1 0380: 8086:2a03 (rev 0c) Subsystem: 104d:9005 Flags: bus master, fast devsel, latency 0 Memory at fc100000 (64-bit, non-prefetchable) [size=1M] Capabilities: [d0] Power Management version 3
00:1a.0 0c03: 8086:2834 (rev 03) (prog-if 00 [UHCI]) Subsystem: 104d:9005 Flags: bus master, medium devsel, latency 0, IRQ 17 I/O ports at 1820 [size=32]
00:1a.1 0c03: 8086:2835 (rev 03) (prog-if 00 [UHCI]) Subsystem: 104d:9005 Flags: bus master, medium devsel, latency 0, IRQ 20 I/O ports at 1840 [size=32]
00:1a.7 0c03: 8086:283a (rev 03) (prog-if 20 [EHCI]) Subsystem: 104d:9005 Flags: bus master, medium devsel, latency 0, IRQ 18 Memory at fc604800 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port
00:1b.0 0403: 8086:284b (rev 03) Subsystem: 104d:9005 Flags: bus master, fast devsel, latency 0, IRQ 21 Memory at fc400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Unknown type IRQ 0 Capabilities: [100] Virtual Channel Capabilities: [130] Unknown (5)
00:1c.0 0604: 8086:283f (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f6000000-f7ffffff Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff Capabilities: [40] Express Root Port (Slot+) IRQ 0 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [90] Subsystem: 104d:9005 Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5)
00:1c.1 0604: 8086:2841 (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=05, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f8000000-f9ffffff Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff Capabilities: [40] Express Root Port (Slot+) IRQ 0 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [90] Subsystem: 104d:9005 Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5)
00:1c.2 0604: 8086:2843 (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=07, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: fa000000-fbffffff Prefetchable memory behind bridge: 00000000f4000000-00000000f5ffffff Capabilities: [40] Express Root Port (Slot+) IRQ 0 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [90] Subsystem: 104d:9005 Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5)
00:1c.4 0604: 8086:2847 (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fc200000-fc2fffff Capabilities: [40] Express Root Port (Slot+) IRQ 0 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [90] Subsystem: 104d:9005 Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5)
00:1d.0 0c03: 8086:2830 (rev 03) (prog-if 00 [UHCI]) Subsystem: 104d:9005 Flags: bus master, medium devsel, latency 0, IRQ 22 I/O ports at 1860 [size=32]
00:1d.1 0c03: 8086:2831 (rev 03) (prog-if 00 [UHCI]) Subsystem: 104d:9005 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at 1880 [size=32]
00:1d.2 0c03: 8086:2832 (rev 03) (prog-if 00 [UHCI]) Subsystem: 104d:9005 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at 18a0 [size=32]
00:1d.7 0c03: 8086:2836 (rev 03) (prog-if 20 [EHCI]) Subsystem: 104d:9005 Flags: bus master, medium devsel, latency 0, IRQ 22 Memory at fc604c00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port
00:1e.0 0604: 8086:2448 (rev f3) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=09, subordinate=0d, sec-latency=56 I/O behind bridge: 00006000-00006fff Memory behind bridge: fc300000-fc3fffff Prefetchable memory behind bridge: 0000000088000000-000000008bffffff Capabilities: [50] Subsystem: 104d:9005
00:1f.0 0601: 8086:2815 (rev 03) Subsystem: 104d:9005 Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information
00:1f.1 0101: 8086:2850 (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: 104d:9005 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at 1810 [size=16]
00:1f.2 0106: 8086:2829 (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: 104d:9005 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 219 I/O ports at 1c00 [size=8] I/O ports at 18d4 [size=4] I/O ports at 18d8 [size=8] I/O ports at 18d0 [size=4] I/O ports at 18e0 [size=32] Memory at fc604000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/2 Enable+ Capabilities: [70] Power Management version 3 Capabilities: [a8] #12 [0010]
00:1f.3 0c05: 8086:283e (rev 03) Subsystem: 104d:9005 Flags: medium devsel, IRQ 19 Memory at 8c000000 (32-bit, non-prefetchable) [size=256] I/O ports at 1c20 [size=32]
06:00.0 0280: 8086:4222 (rev 02) Subsystem: 8086:1051 Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at fa000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [c8] Power Management version 2 Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [e0] Express Legacy Endpoint IRQ 0 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ba-8c-73-ff-ff-77-1b-00
08:00.0 0200: 11ab:4351 (rev 16) Subsystem: 104d:9005 Flags: bus master, fast devsel, latency 0, IRQ 218 Memory at fc200000 (64-bit, non-prefetchable) [size=16K] I/O ports at 5000 [size=256] Capabilities: [48] Power Management version 2 Capabilities: [50] Vital Product Data Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Capabilities: [e0] Express Legacy Endpoint IRQ 0 Capabilities: [100] Advanced Error Reporting
09:03.0 0607: 104c:8039 Subsystem: 104d:9005 Flags: bus master, medium devsel, latency 168, IRQ 17 Memory at fc300000 (32-bit, non-prefetchable) [size=4K] Bus: primary=09, secondary=0a, subordinate=0d, sec-latency=176 Memory window 0: 88000000-8bfff000 (prefetchable) Memory window 1: 90000000-93fff000 I/O window 0: 00006000-000060ff I/O window 1: 00006400-000064ff 16-bit legacy interface ports at 0001
09:03.1 0c00: 104c:803a (prog-if 10 [OHCI]) Subsystem: 104d:9005 Flags: bus master, medium devsel, latency 32, IRQ 16 Memory at fc302000 (32-bit, non-prefetchable) [size=2K] Memory at fc304000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2
09:03.2 0180: 104c:803b Subsystem: 104d:9005 Flags: bus master, medium devsel, latency 57, IRQ 18 Memory at fc301000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2
On Saturday 15 September 2007 06:34:31 you wrote:
Hi, i bought a sony vaio fz19vn, i try both modes for the snd_hda_intel, vaio and vaio-ar, the same problem happen with them, when i plugin the headset internal speakers are not muted, so here is the card info. I read the changelog for version 1.0.15 and it says automute was added for the AD1986 which has jack detection, but this is a different codec. I have programming skills but i'm not familiarized with alsa internals, so ask me anything you need and i try to help. It would be nice a control to enable/disable automute and another two to enable/disable internal and external speakers. Best Regards Pablo
/proc/asound/card0/codec#1:
Codec: Conexant ID 2c06 Address: 1 Vendor Id: 0x14f12c06 Subsystem Id: 0x104d1700 Revision Id: 0x100000 Modem Function Group: 0x2
/proc/asound/card0/codec#0 :
Codec: SigmaTel STAC9872AK Address: 0 Vendor Id: 0x83847662 Subsystem Id: 0x104d2300 Revision Id: 0x100201 No Modem Function Group found Default PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1 Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x7f 0x7f] Power: 0x0 Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0xff 0xff] Power: 0x0 Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0xff 0xff] Power: 0x0 Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x7f 0x7f] Power: 0x0 Node 0x06 [Audio Input] wcaps 0x1d0541: Stereo Power: 0x0 Connection: 1 0x07 Node 0x07 [Audio Selector] wcaps 0x300903: Stereo Amp-In Amp-In caps: N/A Amp-In vals: [0x00 0x00] Connection: 1 0x0e Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo Power: 0x0 Connection: 1 0x09 Node 0x09 [Audio Selector] wcaps 0x300903: Stereo Amp-In Amp-In caps: N/A Amp-In vals: [0x0c 0x0c] Connection: 1 0x15 Node 0x0a [Pin Complex] wcaps 0x400181: Stereo Pincap 0x08173c: IN OUT HP Detect Pin Default 0x04214020: [Jack] HP Out at Ext Right Conn = 1/8, Color = Green Pin-ctls: 0xc0: OUT HP Connection: 1 0x02 Node 0x0b [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0814: OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x00: Connection: 1 0x04 Node 0x0c [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0814: OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x00: Connection: 1 0x03 Node 0x0d [Pin Complex] wcaps 0x400181: Stereo Pincap 0x08173c: IN OUT HP Detect Pin Default 0x04a15030: [Jack] Mic at Ext Right Conn = 1/8, Color = Red Pin-ctls: 0x24: IN Connection: 1 0x02 Node 0x0e [Pin Complex] wcaps 0x400081: Stereo Pincap 0x0824: IN Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x20: IN Node 0x0f [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0814: OUT Detect Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown Pin-ctls: 0x40: OUT Connection: 1 0x05 Node 0x10 [Audio Output] wcaps 0x40211: Stereo Digital PCM: rates [0x3e0]: 44100 48000 88200 96000 176400 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Node 0x11 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x00: Connection: 2 0x10* 0x09 Node 0x12 [Audio Input] wcaps 0x140311: Stereo Digital PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Connection: 1 0x13 Node 0x13 [Pin Complex] wcaps 0x440381: Stereo Digital Pincap 0x0834: IN OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x00: Connection: 1 0x18 Node 0x14 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x90a7013e: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown Pin-ctls: 0x20: IN Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=1 Amp-Out vals: [0x00 0x00] Connection: 4 0x0a 0x0d* 0x14 0x02 Node 0x16 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0 Amp-Out vals: [0x00] Node 0x17 [Volume Knob Widget] wcaps 0x600000: Mono Node 0x18 [Audio Output] wcaps 0x40201: Stereo Digital