At Fri, 10 Aug 2012 13:29:32 +0200, David Henningsson wrote:
When "Beep Playback Switch" had a different value on left and right channels (such as muting left but not right, or vice versa), this could result in the right channel being ignored.
This patch enables beep to be sounding from right channel only, and also give correct result back to userspace (e g amixer).
Signed-off-by: David Henningsson david.henningsson@canonical.com
Applied now. Thanks.
Takashi
sound/pci/hda/hda_beep.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c index 0bc2315..d26ae65 100644 --- a/sound/pci/hda/hda_beep.c +++ b/sound/pci/hda/hda_beep.c @@ -237,10 +237,9 @@ int snd_hda_mixer_amp_switch_get_beep(struct snd_kcontrol *kcontrol, { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct hda_beep *beep = codec->beep;
- if (beep) {
- if (beep && !beep->enabled) { ucontrol->value.integer.value[0] =
ucontrol->value.integer.value[1] =beep->enabled;
ucontrol->value.integer.value[1] = 0;@@ -252,9 +251,18 @@ int snd_hda_mixer_amp_switch_put_beep(struct snd_kcontrol *kcontrol, { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct hda_beep *beep = codec->beep;
- if (beep)
snd_hda_enable_beep_device(codec,*ucontrol->value.integer.value);
- if (beep) {
u8 chs = get_amp_channels(kcontrol);int enable = 0;long *valp = ucontrol->value.integer.value;if (chs & 1) {enable |= *valp;valp++;}if (chs & 2)enable |= *valp;snd_hda_enable_beep_device(codec, enable);- } return snd_hda_mixer_amp_switch_put(kcontrol, ucontrol);
} EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_switch_put_beep); -- 1.7.9.5