On Wed, Nov 16, 2011 at 02:25:00AM +0800, Stephen Warren wrote:
Wu Fengguang wrote at Tuesday, November 15, 2011 7:33 AM:
The Intel HDMI chips (ironlake at least) are found to have ~250ms delay between the ELD_Valid=1 hotplug event is send and the ELD buffer becomes actually readable. During the time the ELD buffer is mysteriously all 0.
Fix it by scheduling a delayed work to re-read ELD buffer after 300ms.
Any idea why; is the graphics driver writing the ELD data to the audio HW after triggering the unsolicited even rather than before, or something like that?
Nope. The graphics driver is doing
eld_valid = 0 write to eld buffer eld_valid = 1
250mS almost sounds like it's setting ELDV in the audio HW, then going and reading the EDID, then writing the EDID to the audio HW; perhaps the graphics driver is accidentally setting PRESENT+ELDV when it's meant to be setting just PRESENT, and later setting ELDV?
_From the debug dmesg, I'm pretty sure that the ELDV events are triggered exactly by the "eld_valid = 0" and "eld_valid = 1" register writes. Since the ELD data is already prepared, there is no EDID read in between.
Below is the dmesg representing a video mode set.
ELD writes from the graphics driver
[ 424.254958] [drm:intel_write_eld], ELD on [CONNECTOR:12:HDMI-A-2], [ENCODER:11:TMDS-11] [ 424.257670] [drm:ironlake_write_eld], ELD on pipe B [ 424.259833] [drm:ironlake_write_eld], Audio directed to unknown port [ 424.262156] [drm:ironlake_write_eld], ELD size 13
ELD events received by audio driver (eld reads 0)
[ 424.263258] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=0 [ 424.265877] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1 [ 424.272415] ALSA hda_eld.c:259 HDMI: Unknown ELD version 0 [ 424.274566] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1 [ 424.277027] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1 [ 424.283157] ALSA hda_eld.c:259 HDMI: Unknown ELD version 0
graphics driver go on with its job
[ 424.314331] [drm:intel_wait_for_vblank], vblank wait timed out [ 424.367183] [drm:intel_wait_for_vblank], vblank wait timed out [ 424.368960] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 424.370700] [drm:ironlake_update_wm], FIFO watermarks For pipe B - plane 42, cursor: 6 [ 424.424056] [drm:intel_wait_for_vblank], vblank wait timed out [ 424.476906] [drm:intel_wait_for_vblank], vblank wait timed out [ 424.479169] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100 [ 424.481084] [drm:ironlake_fdi_link_train], FDI train 1 done. [ 424.483452] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600 [ 424.485444] [drm:ironlake_fdi_link_train], FDI train 2 done. [ 424.486765] [drm:ironlake_fdi_link_train], FDI train done [ 424.490820] [drm:intel_update_fbc], [ 424.491841] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 424.494449] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:HDMI-A-2] set DPMS on [ 424.505904] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
audio driver repoll the ELD after 300ms (eld data readable now)
[ 424.574763] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1 [ 424.580867] HDMI: detected monitor RX-V1800 at connection type HDMI [ 424.582413] HDMI: available speakers: FL/FR LFE FC RL/RR RC RLC/RRC [ 424.584740] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000 96000 176400 192000 384000, bits = 16 20 24 [ 424.587429] HDMI: supports coding type LPCM: channels = 8, rates = 32000 44100 48000 96000 176400 192000 384000, bits = 16 20 24 [ 424.590968] HDMI: supports coding type AC-3: channels = 6, rates = 32000 44100 48000, max bitrate = 640000 [ 424.594164] HDMI: supports coding type DTS: channels = 7, rates = 32000 44100 48000 96000 176400, max bitrate = 1536000 [ 424.597563] HDMI: supports coding type DSD (One Bit Audio): channels = 6, rates = 44100 [ 424.600284] HDMI: supports coding type E-AC-3/DD+ (Dolby Digital Plus): channels = 8, rates = 44100 48000 [ 424.602420] HDMI: supports coding type MLP (Dolby TrueHD): channels = 8, rates = 48000 176400 384000 [ 424.604478] HDMI: supports coding type DTS-HD: channels = 8, rates = 48000 176400 384000
Thanks, Fengguang