The STA32x chips feature an XTI clock input that needs to be stable before the reset signal is released. Therefore, the chip driver needs to get a handle to the clock. Instead of relying on other parts of the system to enable the clock, let the codec driver grab a handle itself.
In order to keep existing boards working, clock support is made optional.
Signed-off-by: Daniel Mack daniel@zonque.org --- .../devicetree/bindings/sound/st,sta32x.txt | 6 +++++ sound/soc/codecs/sta32x.c | 25 +++++++++++++++++++ 2 files changed, 31 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/st,sta32x.txt b/Documentation/devicetree/bindings/sound/st,sta32x.txt index ff4a685a4303..52265fb757c5 100644 --- a/Documentation/devicetree/bindings/sound/st,sta32x.txt +++ b/Documentation/devicetree/bindings/sound/st,sta32x.txt @@ -19,6 +19,10 @@ Required properties:
Optional properties:
+ - clocks, clock-names: Clock specifier for XTI input clock. + If specified, the clock will be enabled when the codec is probed, + and disabled when it is removed. The 'clock-names' must be set to 'xti'. + - st,output-conf: number, Selects the output configuration: 0: 2-channel (full-bridge) power, 2-channel data-out 1: 2 (half-bridge). 1 (full-bridge) on-board power @@ -79,6 +83,8 @@ Example: codec: sta32x@38 { compatible = "st,sta32x"; reg = <0x1c>; + clocks = <&clock>; + clock-names = "xti"; reset-gpios = <&gpio1 19 0>; power-down-gpios = <&gpio1 16 0>; st,output-conf = /bits/ 8 <0x3>; // set output to 2-channel diff --git a/sound/soc/codecs/sta32x.c b/sound/soc/codecs/sta32x.c index a878c8d92e68..f753d2db0a5a 100644 --- a/sound/soc/codecs/sta32x.c +++ b/sound/soc/codecs/sta32x.c @@ -21,6 +21,7 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> +#include <linux/clk.h> #include <linux/delay.h> #include <linux/pm.h> #include <linux/i2c.h> @@ -142,6 +143,7 @@ static const char *sta32x_supply_names[] = { /* codec private data */ struct sta32x_priv { struct regmap *regmap; + struct clk *xti_clk; struct regulator_bulk_data supplies[ARRAY_SIZE(sta32x_supply_names)]; struct snd_soc_component *component; struct sta32x_platform_data *pdata; @@ -882,6 +884,15 @@ static int sta32x_probe(struct snd_soc_component *component)
sta32x->component = component;
+ if (sta32x->xti_clk) { + ret = clk_prepare_enable(sta32x->xti_clk); + if (ret != 0) { + dev_err(component->dev, + "Failed to enable clock: %d\n", ret); + return ret; + } + } + ret = regulator_bulk_enable(ARRAY_SIZE(sta32x->supplies), sta32x->supplies); if (ret != 0) { @@ -984,6 +995,9 @@ static void sta32x_remove(struct snd_soc_component *component)
sta32x_watchdog_stop(sta32x); regulator_bulk_disable(ARRAY_SIZE(sta32x->supplies), sta32x->supplies); + + if (sta32x->xti_clk) + clk_disable_unprepare(sta32x->xti_clk); }
static const struct snd_soc_component_driver sta32x_component = { @@ -1100,6 +1114,17 @@ static int sta32x_i2c_probe(struct i2c_client *i2c, } #endif
+ /* Clock */ + sta32x->xti_clk = devm_clk_get(dev, "xti"); + if (IS_ERR(sta32x->xti_clk)) { + ret = PTR_ERR(sta32x->xti_clk); + + if (ret == -EPROBE_DEFER) + return ret; + + sta32x->xti_clk = NULL; + } + /* GPIOs */ sta32x->gpiod_nreset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);