On 12/17/07, Takashi Iwai tiwai@suse.de wrote:
At Fri, 14 Dec 2007 15:02:40 -0500, Matthew Ranostay wrote:
@@ -1408,22 +1409,24 @@ static unsigned int dell_3st_pin_configs static unsigned int dell_3st_pin_configs[14] = { 0x02211230, 0x02a11220, 0x01a19040, 0x01114210, 0x01111212, 0x01116211, 0x01813050, 0x01112214,
0x403003fa, 0x40000100, 0x40000100, 0x404003fb,
0x403003fa, 0x90a60040, 0x90a60040, 0x404003fb, 0x40c003fc, 0x40000100};
Just to be sure - is it safe to change this?
@@ -3293,8 +3304,11 @@ static int patch_stac927x(struct hda_cod stac927x_models, stac927x_cfg_tbl); again:
if (spec->board_config < 0) {snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC927x, using BIOS defaults\n");
if (spec->board_config < 0 ||stac927x_brd_tbl[spec->board_config] != NULL) {Should be stac927x_brd_tbl[spec->board_config] == NULL. Also, the following else-if should be fixed (the check is nonsense).
I applied the fixed patch to HG tree. Could you check whether it's OK?
I am on DELL Vostro 1400 and now the sound and headphones jack work nicely out of the box. Unfortunately the built-in microphone still doesn't work. I have 3 capture devices which isn't right I think. I am attaching codec info and amixser outputs.
Thanks,
Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel