22 Oct
2015
22 Oct
'15
9:11 p.m.
On 19/10/15 18:56, Mark Brown wrote:
On Mon, Oct 12, 2015 at 01:40:30PM +0100, Damien Horsley wrote:
+Optional Properties:
- interrupts : Contains the I2S out interrupts. Depending on
- the configuration, there may be no interrupts, one interrupt,
- or an interrupt per I2S channel
If there is an interrupt per channel how should they be described in DT?
In ascending channel order. I will clarify this in the binding document.