hi everyone,
i have a fujitsu siemens amilo pro v3515 notebook, with a via VT8251/ VT8237A chipset. sound works fine through the speakers, but i don't get anything through the headphones, no headphone channel shows up in the mixer, and the headphone jack switch doesn't mute the speakers. i have alsa 1.0.13, and a 2.6.18 kernel. i tried all "model" settings that i could find in ALSA-Configuration in the kernel tree. lspci -nv gives
04:01.0 0403: 1106:3288 (rev 10) Subsystem: 1734:10cb Flags: bus master, fast devsel, latency 0, IRQ 58 Memory at c9100000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Unknown type IRQ 0
(only the stanza for the sound card, yell if you need more), and /proc/asound/card0/codec#0 gives:
Codec: Generic 14f1 ID 5045 Address: 0 Vendor Id: 0x14f15045 Subsystem Id: 0x173410cb Revision Id: 0x100100 Default PCM: rates 0x140, bits 0x0e, types 0x1 Default Amp-In caps: N/A Default Amp-Out caps: N/A Node 0x10 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1 Amp-Out vals: [0x28 0x28] Pincap 0x0810014: OUT EAPD Detect Pin Default 0x92170110: [Fixed] Speaker at Int Front Conn = Analog, Color = Unknown Pin-ctls: 0x40: OUT Power: 0x0 Connection: 2 0x19* 0x17 Node 0x11 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x08113c: IN OUT HP Detect Pin Default 0x0121401f: [Jack] HP Out at Ext Rear Conn = 1/8, Color = Green Pin-ctls: 0xc0: OUT HP Power: 0x0 Connection: 2 0x19* 0x17 Node 0x12 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1 Amp-Out vals: [0xab 0xab] Pincap 0x08113c: IN OUT HP Detect Pin Default 0x01a19020: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink Pin-ctls: 0x20: IN Power: 0x0 Connection: 2 0x19* 0x17 Node 0x13 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x214571f0: [Jack] SPDIF Out at Sep Rear Conn = Optical, Color = Yellow Pin-ctls: 0x00: Connection: 1 0x18 Node 0x14 [Pin Complex] wcaps 0x400081: Stereo Pincap 0x081124: IN Detect Pin Default 0x97a7012e: [Fixed] Mic at Int Riser Conn = Analog, Color = Unknown Pin-ctls: 0x20: IN Node 0x15 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x400001f0: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x00: Node 0x16 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0b, mute=1 Amp-Out vals: [0x06] Node 0x17 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x14, nsteps=0x2b, stepsize=0x05, mute=1 Amp-In vals: [0x94 0x94] [0x17 0x17] [0x94 0x94] [0x94 0x94] [0x94 0x94] Power: 0x0 Connection: 5 0x19 0x14 0x12 0x11 0x15 Node 0x18 [Audio Output] wcaps 0x211: Stereo Digital PCM: rates 0x040, bits 0x06, types 0x5 Node 0x19 [Audio Output] wcaps 0xc11: Stereo PCM: rates 0x540, bits 0x0e, types 0x1 Power: 0x0 Node 0x1a [Audio Input] wcaps 0x100d0b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x17, stepsize=0x05, mute=1 Amp-In vals: [0x17 0x17] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Power: 0x0 Connection: 5 0x17 0x14 0x12 0x11 0x15* Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono
please tell me if there is anything i can do, any additional information you need, or any general tipps.
thanks robert