Although the power state check is performed in various places (e.g. at the entrance of quite a few ioctls), there can be still some pending tasks that already went into the ioctl handler or other ops, and those may access the hardware even after the power state check. For example, kcontrol access ioctl paths that call info/get/put callbacks may update the hardware registers. If a system wants to assure the free from such hw access (like the case of PCI rescan feature we're going to implement in future), this situation must be avoided, and we have to sync such in-flight tasks finishing beforehand.
For that purpose, this patch introduces a few new things in core code: - A refcount, power_ref, and a wait queue, power_ref_sleep, to the card object - A few new helpers, snd_power_ref(), snd_power_unref(), snd_power_ref_and_wait(), and snd_power_sync_ref()
In the code paths that call kctl info/read/write/tlv ops, we check the power state with the newly introduced snd_power_ref_and_wait(). This function also takes the card.power_ref refcount for tracking this in-flight task. Once after the access finishes, snd_power_unref() is called to released the refcount in return. So the driver can sync via snd_power_sync_ref() assuring that all in-flight tasks have been finished.
As of this patch, snd_power_sync_ref() is called only at snd_card_disconnect(), but it'll be used in other places in future.
Note that atomic_t is used for power_ref intentionally instead of refcount_t. It's because of the design of refcount_t type; refcount_t cannot be zero-based, and it cannot do dec_and_test() call for multiple times, hence it's not suitable for our purpose.
Also, this patch changes snd_power_wait() to accept only SNDRV_CTL_POWER_D0, which is the only value that makes sense. In later patch, the snd_power_wait() calls will be cleaned up.
Signed-off-by: Takashi Iwai tiwai@suse.de --- include/sound/core.h | 42 +++++++++++++++++++++++++++++++ sound/core/control.c | 23 +++++++++++++---- sound/core/control_compat.c | 5 +++- sound/core/init.c | 50 +++++++++++++++++++++++++++++++------ 4 files changed, 106 insertions(+), 14 deletions(-)
diff --git a/include/sound/core.h b/include/sound/core.h index d69dfc6c4953..3acb754108b1 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -128,7 +128,9 @@ struct snd_card {
#ifdef CONFIG_PM unsigned int power_state; /* power state */ + atomic_t power_ref; wait_queue_head_t power_sleep; + wait_queue_head_t power_ref_sleep; #endif
#if IS_ENABLED(CONFIG_SND_MIXER_OSS) @@ -151,12 +153,52 @@ static inline void snd_power_change_state(struct snd_card *card, unsigned int st wake_up(&card->power_sleep); }
+/** + * snd_power_ref - Take the reference count for power control + * @card: sound card object + * + * The power_ref reference of the card is used for managing to block + * the snd_power_sync_ref() operation. This function increments the reference. + * The counterpart snd_power_unref() has to be called appropriately later. + */ +static inline void snd_power_ref(struct snd_card *card) +{ + atomic_inc(&card->power_ref); +} + +/** + * snd_power_unref - Release the reference count for power control + * @card: sound card object + */ +static inline void snd_power_unref(struct snd_card *card) +{ + if (atomic_dec_and_test(&card->power_ref)) + wake_up(&card->power_ref_sleep); +} + +/** + * snd_power_sync_ref - wait until the card power_ref is freed + * @card: sound card object + * + * This function is used to synchronize with the pending power_ref being + * released. + */ +static inline void snd_power_sync_ref(struct snd_card *card) +{ + wait_event(card->power_ref_sleep, !atomic_read(&card->power_ref)); +} + /* init.c */ int snd_power_wait(struct snd_card *card, unsigned int power_state); +int snd_power_ref_and_wait(struct snd_card *card);
#else /* ! CONFIG_PM */
static inline int snd_power_wait(struct snd_card *card, unsigned int state) { return 0; } +static inline void snd_power_ref(struct snd_card *card) {} +static inline void snd_power_unref(struct snd_card *card) {} +static inline int snd_power_ref_and_wait(struct snd_card *card) { return 0; } +static inline void snd_power_sync_ref(struct snd_card *card) {} #define snd_power_get_state(card) ({ (void)(card); SNDRV_CTL_POWER_D0; }) #define snd_power_change_state(card, state) do { (void)(card); } while (0)
diff --git a/sound/core/control.c b/sound/core/control.c index 498e3701514a..638da34605ba 100644 --- a/sound/core/control.c +++ b/sound/core/control.c @@ -995,7 +995,10 @@ static int __snd_ctl_elem_info(struct snd_card *card, #ifdef CONFIG_SND_DEBUG info->access = 0; #endif - result = kctl->info(kctl, info); + result = snd_power_ref_and_wait(card); + if (!result) + result = kctl->info(kctl, info); + snd_power_unref(card); if (result >= 0) { snd_BUG_ON(info->access); index_offset = snd_ctl_get_ioff(kctl, &info->id); @@ -1088,7 +1091,10 @@ static int snd_ctl_elem_read(struct snd_card *card,
if (!snd_ctl_skip_validation(&info)) fill_remaining_elem_value(control, &info, pattern); - ret = kctl->get(kctl, control); + ret = snd_power_ref_and_wait(card); + if (!ret) + ret = kctl->get(kctl, control); + snd_power_unref(card); if (ret < 0) return ret; if (!snd_ctl_skip_validation(&info) && @@ -1154,7 +1160,10 @@ static int snd_ctl_elem_write(struct snd_card *card, struct snd_ctl_file *file, }
snd_ctl_build_ioff(&control->id, kctl, index_offset); - result = kctl->put(kctl, control); + result = snd_power_ref_and_wait(card); + if (!result) + result = kctl->put(kctl, control); + snd_power_unref(card); if (result < 0) { up_write(&card->controls_rwsem); return result; @@ -1669,7 +1678,7 @@ static int call_tlv_handler(struct snd_ctl_file *file, int op_flag, {SNDRV_CTL_TLV_OP_CMD, SNDRV_CTL_ELEM_ACCESS_TLV_COMMAND}, }; struct snd_kcontrol_volatile *vd = &kctl->vd[snd_ctl_get_ioff(kctl, id)]; - int i; + int i, ret;
/* Check support of the request for this element. */ for (i = 0; i < ARRAY_SIZE(pairs); ++i) { @@ -1687,7 +1696,11 @@ static int call_tlv_handler(struct snd_ctl_file *file, int op_flag, vd->owner != NULL && vd->owner != file) return -EPERM;
- return kctl->tlv.c(kctl, op_flag, size, buf); + ret = snd_power_ref_and_wait(file->card); + if (!ret) + ret = kctl->tlv.c(kctl, op_flag, size, buf); + snd_power_unref(file->card); + return ret; }
static int read_tlv_buf(struct snd_kcontrol *kctl, struct snd_ctl_elem_id *id, diff --git a/sound/core/control_compat.c b/sound/core/control_compat.c index 1d708aab9c98..19133ee076c5 100644 --- a/sound/core/control_compat.c +++ b/sound/core/control_compat.c @@ -187,7 +187,10 @@ static int get_ctl_type(struct snd_card *card, struct snd_ctl_elem_id *id, return -ENOMEM; } info->id = *id; - err = kctl->info(kctl, info); + err = snd_power_ref_and_wait(card); + if (!err) + err = kctl->info(kctl, info); + snd_power_unref(card); up_read(&card->controls_rwsem); if (err >= 0) { err = info->type; diff --git a/sound/core/init.c b/sound/core/init.c index ef41f5b3a240..2c62e035bc62 100644 --- a/sound/core/init.c +++ b/sound/core/init.c @@ -220,6 +220,8 @@ int snd_card_new(struct device *parent, int idx, const char *xid, mutex_init(&card->memory_mutex); #ifdef CONFIG_PM init_waitqueue_head(&card->power_sleep); + init_waitqueue_head(&card->power_ref_sleep); + atomic_set(&card->power_ref, 0); #endif init_waitqueue_head(&card->remove_sleep); card->sync_irq = -1; @@ -442,6 +444,7 @@ int snd_card_disconnect(struct snd_card *card)
#ifdef CONFIG_PM wake_up(&card->power_sleep); + snd_power_sync_ref(card); #endif return 0; } @@ -1002,21 +1005,28 @@ EXPORT_SYMBOL(snd_card_file_remove);
#ifdef CONFIG_PM /** - * snd_power_wait - wait until the power-state is changed. - * @card: soundcard structure - * @power_state: expected power state + * snd_power_ref_and_wait - wait until the card gets powered up + * @card: soundcard structure * - * Waits until the power-state is changed. + * Take the power_ref reference count of the given card, and + * wait until the card gets powered up to SNDRV_CTL_POWER_D0 state. + * The refcount is down again while sleeping until power-up, hence this + * function can be used for syncing the floating control ops accesses, + * typically around calling control ops. * - * Return: Zero if successful, or a negative error code. + * The caller needs to pull down the refcount via snd_power_unref() later + * no matter whether the error is returned from this function or not. + * + * Return: Zero if successful, or a negative error code. */ -int snd_power_wait(struct snd_card *card, unsigned int power_state) +int snd_power_ref_and_wait(struct snd_card *card) { wait_queue_entry_t wait; int result = 0;
+ snd_power_ref(card); /* fastpath */ - if (snd_power_get_state(card) == power_state) + if (snd_power_get_state(card) == SNDRV_CTL_POWER_D0) return 0; init_waitqueue_entry(&wait, current); add_wait_queue(&card->power_sleep, &wait); @@ -1025,13 +1035,37 @@ int snd_power_wait(struct snd_card *card, unsigned int power_state) result = -ENODEV; break; } - if (snd_power_get_state(card) == power_state) + if (snd_power_get_state(card) == SNDRV_CTL_POWER_D0) break; + snd_power_unref(card); set_current_state(TASK_UNINTERRUPTIBLE); schedule_timeout(30 * HZ); + snd_power_ref(card); } remove_wait_queue(&card->power_sleep, &wait); return result; } +EXPORT_SYMBOL_GPL(snd_power_ref_and_wait); + +/** + * snd_power_wait - wait until the card gets powered up (old form) + * @card: soundcard structure + * @power_state: expected power state + * + * Wait until the card gets powered up to SNDRV_CTL_POWER_D0 state. + * @power_state must be SNDRV_CTL_POWER_D0. + * + * Return: Zero if successful, or a negative error code. + */ +int snd_power_wait(struct snd_card *card, unsigned int power_state) +{ + int ret; + + if (WARN_ON(power_state != SNDRV_CTL_POWER_D0)) + return 0; + ret = snd_power_ref_and_wait(card); + snd_power_unref(card); + return ret; +} EXPORT_SYMBOL(snd_power_wait); #endif /* CONFIG_PM */