Leaving microphone bias off is a valid setting and even used in the DT binding document example. Add this setting here and document the same. Although it may not make much sense to enable a microphone here without any bias, it is a valid setting that can be chosen by DT and may be needed for some boards.
Signed-off-by: Andrew F. Davis afd@ti.com Acked-by: Rob Herring robh@kernel.org --- Documentation/devicetree/bindings/sound/tlv320aic31xx.txt | 1 + include/dt-bindings/sound/tlv320aic31xx-micbias.h | 1 + sound/soc/codecs/tlv320aic31xx.c | 1 + 3 files changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt index 5b3c33bb99e5..411cc46a2c58 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt @@ -24,6 +24,7 @@ Optional properties:
- reset-gpios - GPIO specification for the active low RESET input. - ai31xx-micbias-vg - MicBias Voltage setting + 0 or MICBIAS_OFF - MICBIAS output is powered off 1 or MICBIAS_2_0V - MICBIAS output is powered to 2.0V 2 or MICBIAS_2_5V - MICBIAS output is powered to 2.5V 3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD diff --git a/include/dt-bindings/sound/tlv320aic31xx-micbias.h b/include/dt-bindings/sound/tlv320aic31xx-micbias.h index c6895a18a455..069484070fcf 100644 --- a/include/dt-bindings/sound/tlv320aic31xx-micbias.h +++ b/include/dt-bindings/sound/tlv320aic31xx-micbias.h @@ -2,6 +2,7 @@ #ifndef __DT_TLV320AIC31XX_MICBIAS_H #define __DT_TLV320AIC31XX_MICBIAS_H
+#define MICBIAS_OFF 0 #define MICBIAS_2_0V 1 #define MICBIAS_2_5V 2 #define MICBIAS_AVDDV 3 diff --git a/sound/soc/codecs/tlv320aic31xx.c b/sound/soc/codecs/tlv320aic31xx.c index bf92d36b8f8a..7d87df518fed 100644 --- a/sound/soc/codecs/tlv320aic31xx.c +++ b/sound/soc/codecs/tlv320aic31xx.c @@ -1421,6 +1421,7 @@ static int aic31xx_i2c_probe(struct i2c_client *i2c, fwnode_property_read_u32(aic31xx->dev->fwnode, "ai31xx-micbias-vg", &micbias_value); switch (micbias_value) { + case MICBIAS_OFF: case MICBIAS_2_0V: case MICBIAS_2_5V: case MICBIAS_AVDDV: