From: Krzysztof Helt krzysztof.h1@wp.pl
Narrow the dma and irq selection after the DOS driver.
Add ALSA configuration description as well.
Signed-off-by: Krzysztof Helt krzysztof.h1@wp.pl --- The dma8 must be 8-bit otherwise the 8-bit sound played through 16-bit dma has metalic noise. The 8-bit DMA cannot play 16-bit sound.
Documentation/sound/alsa/ALSA-Configuration.txt | 15 +++++++++++++++ sound/isa/sb/jazz16.c | 21 ++++++++++++++++++++- sound/isa/sb/sb8_main.c | 3 ++- 3 files changed, 37 insertions(+), 2 deletions(-)
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 8923597..92b0975 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1123,6 +1123,21 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
This module supports multiple cards, autoprobe and ISA PnP.
+ Module snd-jazz16 + ------------------- + + Module for Media Vision Jazz16 chipset. The chipset consists of 3 chips: + MVD1216 + MVA416 + MVA514. + + port - port # for SB DSP chip (0x210,0x220,0x230,0x240,0x250,0x260) + irq - IRQ # for SB DSP chip (3,5,7,9,10,15) + dma8 - DMA # for SB DSP chip (1,3) + dma16 - DMA # for SB DSP chip (5,7) + mpu_port - MPU-401 port # (0x300,0x310,0x320,0x330) + mpu_irq - MPU-401 irq # (2,3,5,7) + + This module supports multiple cards. + Module snd-korg1212 -------------------
diff --git a/sound/isa/sb/jazz16.c b/sound/isa/sb/jazz16.c index d52966b..8d21a3f 100644 --- a/sound/isa/sb/jazz16.c +++ b/sound/isa/sb/jazz16.c @@ -189,10 +189,29 @@ static int __devinit snd_jazz16_match(struct device *devptr, unsigned int dev) if (port[dev] == SNDRV_AUTO_PORT) { snd_printk(KERN_ERR "please specify port\n"); return 0; + } else if (port[dev] == 0x200 || (port[dev] & ~0x270)) { + snd_printk(KERN_ERR "incorrect port specified\n"); + return 0; + } + if (dma8[dev] != SNDRV_AUTO_DMA && + dma8[dev] != 1 && dma8[dev] != 3) { + snd_printk(KERN_ERR "dma8 must be 1 or 3\n"); + return 0; } if (dma16[dev] != SNDRV_AUTO_DMA && dma16[dev] != 5 && dma16[dev] != 7) { - snd_printk(KERN_ERR "dma16 must be 5 or 7"); + snd_printk(KERN_ERR "dma16 must be 5 or 7\n"); + return 0; + } + if (mpu_port[dev] != SNDRV_AUTO_PORT && + (mpu_port[dev] & ~0x030) != 0x300) { + snd_printk(KERN_ERR "incorrect mpu_port specified\n"); + return 0; + } + if (mpu_irq[dev] != SNDRV_AUTO_DMA && + mpu_irq[dev] != 2 && mpu_irq[dev] != 3 && + mpu_irq[dev] != 5 && mpu_irq[dev] != 7) { + snd_printk(KERN_ERR "mpu_irq must be 2, 3, 5 or 7\n"); return 0; } return 1; diff --git a/sound/isa/sb/sb8_main.c b/sound/isa/sb/sb8_main.c index 3222aed..7d84c9f 100644 --- a/sound/isa/sb/sb8_main.c +++ b/sound/isa/sb/sb8_main.c @@ -510,7 +510,8 @@ static int snd_sb8_open(struct snd_pcm_substream *substream) } switch (chip->hardware) { case SB_HW_JAZZ16: - runtime->hw.formats |= SNDRV_PCM_FMTBIT_S16_LE; + if (chip->dma16 == 5 || chip->dma16 == 7) + runtime->hw.formats |= SNDRV_PCM_FMTBIT_S16_LE; runtime->hw.rates |= SNDRV_PCM_RATE_8000_48000; runtime->hw.rate_min = 4000; runtime->hw.rate_max = 50000;