tlv320aic3x board info registration here is not working for couple of reasons:
- TLV320AIC33 i2c address is 0x18 instead of 0x1b - i2c bus indexing in omap starts from 1 so bus number should be 2 - arch/arm/mach-omap2/board-n8x0.c doesn't register the second bus so devices are not probed anyway
As this is not currently working and there are patches adding tlv320aic3x registration into board-n8x0.c, this patch finally removes this temporary registration.
Signed-off-by: Jarkko Nikula jhnikula@gmail.com --- Liam, I'm thinking the N810 multi-component conversion. I think it would be easiest for you if there is no board-n8x0.c changes. It avoids possible merge conflicts with those upcoming registration changes and adding n810_aic33_setup can be done afterwards. I.e. it's ok if m-c removes the n810_aic33_setup from n810.c but doesn't add it to board-n8x0.c. --- sound/soc/omap/n810.c | 9 --------- 1 files changed, 0 insertions(+), 9 deletions(-)
diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c index 08e09d7..58dcaac 100644 --- a/sound/soc/omap/n810.c +++ b/sound/soc/omap/n810.c @@ -336,13 +336,6 @@ static struct snd_soc_device n810_snd_devdata = {
static struct platform_device *n810_snd_device;
-/* temporary i2c device creation until this can be moved into the machine - * support file. -*/ -static struct i2c_board_info i2c_device[] = { - { I2C_BOARD_INFO("tlv320aic3x", 0x1b), } -}; - static int __init n810_soc_init(void) { int err; @@ -351,8 +344,6 @@ static int __init n810_soc_init(void) if (!(machine_is_nokia_n810() || machine_is_nokia_n810_wimax())) return -ENODEV;
- i2c_register_board_info(1, i2c_device, ARRAY_SIZE(i2c_device)); - n810_snd_device = platform_device_alloc("soc-audio", -1); if (!n810_snd_device) return -ENOMEM;