Stephen Warren wrote at Wednesday, February 09, 2011 9:33 AM:
Mark Brown wrote at Wednesday, February 09, 2011 6:47 AM:
Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com
sound/soc/codecs/wm8903.c | 66 ++++++++++++++++++++++++++++++++++++++++++--- 1 files changed, 62 insertions(+), 4 deletions(-)
...I'll make sure to test it within the next few days, once it's applied.
Mark,
I did find one issue with this.
With the default Left/Right Capture Mux settings, and the patch series I just posted, mic detection now works fine in all the scenarios I tested:
1) Mic plugged in before loading driver, or not. 2) Mic plugged in when starting to capture, or not. 3) Mic removed and plugged back in while capture active.
However, if I flip the Right Capture Mux to setting Left (while not capturing), then this breaks case (3) above; the initial portion of the recording is fine, but when I remove and plug the mic back in, something isn't turned on, and so nothing is recorded after that.
I haven't had a chance to look into this yet, but can later; probably on Saturday evening.