Re: [alsa-devel] simle-card DT style for DPCM

8 Sep 2014


      Hi Lars
Thank you for your feedback
...
...
  compatible = "simple-audio-card"; # normal simple-card

  compatible = "soc-audio-card";    # special sound card
                                    # we use DPCM this time

If there is no difference in hardware there shouldn't be any difference in 
the hardware description.
Lets try to get to the bottom of the problem. Why do you want to enable DPCM 
on some cards and not enable it on others?
2 reasons for enabling DPCM
 1. to use "sampling rate convert"
 2. we need to use multi CPU (2cpu + 1codec)
2nd case is required in our next SoC.
About 1st case, Mark already agreed this style
-- use DPCM for sampling-rate-convert --
sound {
    compatible = "simple-audio-card";
    ...
simple-audio-card,dai-link {
    	...
    	sampling-rate-convert = <xxx>;
    	cpu {
    		...
    	};
    	codec {
    		...
    	};
    }
}
FE-cpu   : cpu
        FE-codec : dummy
BE-cpu   : dummy
        BE-codec : codec
------------------
We can decide "normal style" or "DPCM style" by checking
"sampling-rate-convert" property. This is easy.
2nd case is my confusion. I suggested this
-- use DPCM for multi DAI --
sound {
    compatible = "simple-audio-card";
    ...
simple-audio-card,dai-link {
    	...
    	cpu@0 {
    		...
    	};
    	cpu@1 {
    		...
    	};
    	codec@1 {
    		...
    	};
    }
}
FE-cpu   : cpu@0
        FE-codec : dummy
BE-cpu   : cpu@1
        BE-codec : codec@1
---------------------
but Mark rejected. His comment is this
I think here what I'd expect to see is only one CPU DAI specified for
    the back end link in the CPU that is actually linked to the CODEC and
    the front ends being worked out by the drivers, unless there are systems
    where the set of front ends can be configured at system build time (as
    opposed to from software at runtime) somehow.
If my understanding was correct,
I think we can care it if DTS file was...
------------------------
sound {
    compatible = "simple-audio-card";
    ...
dai-link: simple-audio-card,dai-link {
    	...
    	cpu@1 { ... };
    	codec@1 { ... };
    }
}
&dai-link {
    cpu@0 { ... };
};
------------------------
We can create everything/something in C code. I have no concern about it.
I need to know DT style of "multi cpu system on simple-card"
(= we will use DPCM in this case)
It is easy to understand for me if Mark/you can show me your idea of DT style.
best regards
---
Kuninori Morimoto