From: Raffaele Recalcati raffaele.recalcati@bticino.it
When McBSP peripheral gets the clock from an external pin, there are three possible chooses, MCBSP_CLKX, MCBSP_CLKR and MCBSP_CLKS. evm-dm365 uses MCBSP_CLKR, instead in bmx board I have a different hardware connection and I use MCBSP_CLKS, so I have added this possibility.
This patch has been developed against the: http://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci.git git tree and has been tested on bmx board (similar to dm365 evm)
Signed-off-by: Raffaele Recalcati raffaele.recalcati@bticino.it Signed-off-by: Davide Bonfanti davide.bonfanti@bticino.it --- arch/arm/mach-davinci/include/mach/asp.h | 15 +++++++++++++++ sound/soc/davinci/davinci-i2s.c | 29 ++++++++++++++++++++++++----- 2 files changed, 39 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h index 834725f..0847d21 100644 --- a/arch/arm/mach-davinci/include/mach/asp.h +++ b/arch/arm/mach-davinci/include/mach/asp.h @@ -63,6 +63,16 @@ struct snd_platform_data { unsigned sram_size_playback; unsigned sram_size_capture;
+ /* + * If McBSP peripheral gets the clock from an external pin, + * there are three chooses, that are MCBSP_CLKX, MCBSP_CLKR + * and MCBSP_CLKS. + * Depending on different hardware connections it is possible + * to use this setting to change the behaviour of McBSP + * driver. The dm365_clk_input_pin enum is available for dm365 + */ + int clk_input_pin; + /* McASP specific fields */ int tdm_slots; u8 op_mode; @@ -78,6 +88,11 @@ enum { MCASP_VERSION_2, /* DA8xx/OMAPL1x */ };
+enum dm365_clk_input_pin { + MCBSP_CLKR = 0, /* DM365 */ + MCBSP_CLKS, +}; + #define INACTIVE_MODE 0 #define TX_MODE 1 #define RX_MODE 2 diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c index c8f038c..ba5644b 100644 --- a/sound/soc/davinci/davinci-i2s.c +++ b/sound/soc/davinci/davinci-i2s.c @@ -122,6 +122,7 @@ static const unsigned char double_fmt[SNDRV_PCM_FORMAT_S32_LE + 1] = { };
struct davinci_mcbsp_dev { + struct device *dev; struct davinci_pcm_dma_params dma_params[2]; void __iomem *base; #define MOD_DSP_A 0 @@ -153,6 +154,7 @@ struct davinci_mcbsp_dev {
unsigned int fmt; int clk_div; + int clk_input_pin; };
static inline void davinci_mcbsp_write_reg(struct davinci_mcbsp_dev *dev, @@ -279,11 +281,26 @@ static int davinci_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai, DAVINCI_MCBSP_PCR_CLKRM; break; case SND_SOC_DAIFMT_CBM_CFS: - /* McBSP CLKR pin is the input for the Sample Rate Generator. - * McBSP FSR and FSX are driven by the Sample Rate Generator. */ - pcr = DAVINCI_MCBSP_PCR_SCLKME | - DAVINCI_MCBSP_PCR_FSXM | - DAVINCI_MCBSP_PCR_FSRM; + pcr = DAVINCI_MCBSP_PCR_FSRM | DAVINCI_MCBSP_PCR_FSXM; + /* + * Selection of the clock input pin that is the + * input for the Sample Rate Generator. + * McBSP FSR and FSX are driven by the Sample Rate + * Generator. + */ + switch (dev->clk_input_pin) { + case MCBSP_CLKS: + pcr |= DAVINCI_MCBSP_PCR_CLKXM | + DAVINCI_MCBSP_PCR_CLKRM; + break; + case MCBSP_CLKR: + pcr |= DAVINCI_MCBSP_PCR_SCLKME; + break; + default: + dev_err(dev->dev, "bad clk_input_pin\n"); + return -EINVAL; + } + break; case SND_SOC_DAIFMT_CBM_CFM: /* codec is master */ @@ -644,6 +661,7 @@ static int davinci_i2s_probe(struct platform_device *pdev) pdata->sram_size_playback; dev->dma_params[SNDRV_PCM_STREAM_CAPTURE].sram_size = pdata->sram_size_capture; + dev->clk_input_pin = pdata->clk_input_pin; } dev->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(dev->clk)) { @@ -676,6 +694,7 @@ static int davinci_i2s_probe(struct platform_device *pdev) goto err_free_mem; } dev->dma_params[SNDRV_PCM_STREAM_CAPTURE].channel = res->start; + dev->dev = &pdev->dev;
davinci_i2s_dai.private_data = dev; davinci_i2s_dai.capture.dma_data = dev->dma_params;