On Wed, 2008-01-16 at 23:06 +0000, De Fuuss wrote:
Ups my bad, somehow the model number got commented out by an update script I ran yesterday. The drivers were recompiled with the "with-debug=detect" option set. I've attached the dmesg, codec#0 output and amixer contents. Dmesg is not very talkative, it did not show "hda_codec_setup_stream:NID=", however I get something of the type "hda_generic: no proper output path found". About the testing, I performed speaker-test every time I changed something (still only output on "Front L/R channels").
I guess that the "hda_generic: no proper output" is caused during detect another codec.
It's strange that there is no messages like "hda_codec_setup_stream:NID=" when you run speaker-test.
From you amixer1.txt, I found that you muted the Surround,C/LFE and
Side.Please unmute them.
Did you just run the "speaker-test -Dplug:surround71 -c8 -sX" with the X=0 and X=1? If it is true, you should change the X from 0 to 8.
Best regards!
Patrick
From: zhe.jiang@intel.com To: fuuss@hotmail.com Date: Wed, 16 Jan 2008 13:49:43 +0800 CC: cmatsuoka@gmail.com; alsa-devel@alsa-project.org Subject: Re: [alsa-devel] intel-hd on an intel G33 motherboard
On Wed, 2008-01-16 at 02:22 +0800, De Fuuss wrote:
Hi,
I have recompiled the driver with --with-debug=detect. Dmesg output is attached to this mail. ALSA specificities seem to be present this time.
Hi,
From the dmesg, there is "hda_codec: Unknown model for ALC883, trying
auto-probe from BIOS" It looks like that no "model=" is assigned. Did you assign model for the driver?
Can you play some music? Then there will be some info in the dmesg like "hda_codec_setup_stream:NID= ". Please paste such info and give the result of "cat /proc/asound/card0/codec#0".
BTW, how did you do the testing? You run speaker-test or by other way?
From the codec info, it seems that there are paths from DAC to Jack.
So it's a little weird that all other jacks are silent.
Thanks!
Hope this helps.
Best regards,
Patrick
From: zhe.jiang@intel.com To: fuuss@hotmail.com Date: Tue, 15 Jan 2008 09:32:35 +0800 CC: cmatsuoka@gmail.com; alsa-devel@alsa-project.org Subject: Re: [alsa-devel] intel-hd on an intel G33 motherboard
On Mon, 2008-01-14 at 17:11 +0000, De Fuuss wrote:
The jumper is now set to enable onboard (Intel HDA) audio. At the back of the barebone there are 5 jacks (4 channels for 7.1
and 1 line in channel) + 1 spdif out.
From these, using 6stack-hp, only the "Front L/R" jack works, none
of the others
On the front, there are 2 jacks (1 headphones and 1 microphone).
The headphone jack works.
Can you tell us how you did the testing?
From the driver code, it's not likely that all other jacks don't
work.
Because the driver support up-mixing, you can play a 2-channel music
and
get sound from 4 jacks on the back panel.
I read the dmesg output that you sent to me. But there is no alsa debug info in it. Did you really configure the driver with the option "--with-debug=detect"? If not, please try it and paste the dmesg info, it is helpful to
trace
the issue.
Best regards! Jiang,zhe
All the channels have been set to 100% in alsamixer.
Considering that a week ago I had 0.0 and today I'm at 2.0, it's
already a improvement. ;-)
Patrick
Subject: Re: [alsa-devel] intel-hd on an intel G33 motherboard From: zhe.jiang@intel.com To: fuuss@hotmail.com CC: cmatsuoka@gmail.com; alsa-devel@alsa-project.org Date: Mon, 14 Jan 2008 16:43:00 +0800
On Mon, 2008-01-14 at 02:06 +0800, De Fuuss wrote: > > Following your advice, I tested per channel output. Using either > 6stack-dig or 6stack-hp, I get noise from Front Left and Right
jacks,
> using speaker-test (X=1 and 2) but not on any other channels.
Hi, Did you mean that after you changed the 'Jumper', you could get the sound from the Front jack on the back channel?
> Patrick > >> Date: Sun, 13 Jan 2008 01:01:50 -0200 >> From: cmatsuoka@gmail.com >> To: fuuss@hotmail.com >> CC: zhe.jiang@intel.com; alsa-devel@alsa-project.org >> Subject: Re: [alsa-devel] intel-hd on an intel G33 motherboard >> >> 2008/1/12 De Fuuss : >> >>> I get the uneasy feeling that something is messed up with this > board. Anyway, for completeness' sake, I attached the results of > amixer contents, cat /proc/asound/card0/codec#0 and dmesg for the > module loaded as 6stack-dig. I have to try 6stack-hp again to
confirm
> if I get something there. >> >> I fixed the Inspiron output, and I'm adding the SG33G5M codec to
the
>> codecgraph codecs collection (git repository at >> http://helllabs.org/git/codecgraph.git). If nodes 0x14, 0x15,
0x16
> and >> 0x17 are the front, rear, clfe and side connectors in the back > panel, >> 6stack-hp should work (at least for the outputs). You can test
the
>> outputs using "speaker-test -Dplug:surround71 -c8 -sX" (where X > varies >> from 1 to 8) and a pair of headphones. >> _______________________________________________ >> Alsa-devel mailing list >> Alsa-devel@alsa-project.org >> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > > _________________________________________________________________ > Express yourself instantly with MSN Messenger! Download today
it's
> FREE! > http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ > _______________________________________________ > Alsa-devel mailing list > Alsa-devel@alsa-project.org > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > >
Express yourself instantly with MSN Messenger! Download today it's
FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/