Reduce the amount of duplicated code by moving the common configuration for twl4030/5030/tpsxx to the twl-common file. Use the omap3_pmic_get_config function from board files to properly configure the PMIC with the common fields.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- arch/arm/mach-omap2/board-3430sdp.c | 42 ++------------------ arch/arm/mach-omap2/board-cm-t35.c | 9 +---- arch/arm/mach-omap2/board-devkit8000.c | 18 +-------- arch/arm/mach-omap2/board-igep0020.c | 20 ++-------- arch/arm/mach-omap2/board-ldp.c | 15 +------ arch/arm/mach-omap2/board-omap3beagle.c | 18 +-------- arch/arm/mach-omap2/board-omap3evm.c | 24 +---------- arch/arm/mach-omap2/board-omap3pandora.c | 17 +------- arch/arm/mach-omap2/board-omap3stalker.c | 24 +---------- arch/arm/mach-omap2/board-omap3touchbook.c | 19 +-------- arch/arm/mach-omap2/board-overo.c | 17 +------- arch/arm/mach-omap2/board-rm680.c | 8 +--- arch/arm/mach-omap2/board-rx51-peripherals.c | 15 +------ arch/arm/mach-omap2/board-zoom-peripherals.c | 51 +++++-------------------- arch/arm/mach-omap2/twl-common.c | 53 ++++++++++++++++++++++++++ arch/arm/mach-omap2/twl-common.h | 6 +++ 16 files changed, 99 insertions(+), 257 deletions(-)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 5dac974..4810dcc 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -231,22 +231,6 @@ static void __init omap_3430sdp_init_early(void) omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL); }
-static int sdp3430_batt_table[] = { -/* 0 C*/ -30800, 29500, 28300, 27100, -26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, -17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100, -11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310, -8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830, -5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170, -4040, 3910, 3790, 3670, 3550 -}; - -static struct twl4030_bci_platform_data sdp3430_bci_data = { - .battery_tmp_tbl = sdp3430_batt_table, - .tblsize = ARRAY_SIZE(sdp3430_batt_table), -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -292,14 +276,6 @@ static struct twl4030_gpio_platform_data sdp3430_gpio_data = { .setup = sdp3430_twl_gpio_setup, };
-static struct twl4030_usb_data sdp3430_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct twl4030_madc_platform_data sdp3430_madc_data = { - .irq_line = 1, -}; - /* regulator consumer mappings */
/* ads7846 on SPI */ @@ -463,24 +439,10 @@ static struct regulator_init_data sdp3430_vpll2 = { .consumer_supplies = sdp3430_vpll2_supplies, };
-static struct twl4030_codec_audio_data sdp3430_audio; - -static struct twl4030_codec_data sdp3430_codec = { - .audio_mclk = 26000000, - .audio = &sdp3430_audio, -}; - static struct twl4030_platform_data sdp3430_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .bci = &sdp3430_bci_data, .gpio = &sdp3430_gpio_data, - .madc = &sdp3430_madc_data, .keypad = &sdp3430_kp_data, - .usb = &sdp3430_usb_data, - .codec = &sdp3430_codec,
.vaux1 = &sdp3430_vaux1, .vaux2 = &sdp3430_vaux2, @@ -496,7 +458,11 @@ static struct twl4030_platform_data sdp3430_twldata = { static int __init omap3430_i2c_init(void) { /* i2c1 for PMIC only */ + omap3_pmic_get_config(&sdp3430_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI | + TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO, 0); omap3_pmic_init("twl4030", &sdp3430_twldata); + /* i2c2 on camera connector (for sensor control) and optional isp1301 */ omap_register_i2c_bus(2, 400, NULL, 0); /* i2c3 on display connector (for DVI, tfp410) */ diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 77456de..e867474 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -410,10 +410,6 @@ static struct regulator_init_data cm_t35_vpll2 = { .consumer_supplies = &cm_t35_vdvi_supply, };
-static struct twl4030_usb_data cm_t35_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static uint32_t cm_t35_keymap[] = { KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_LEFT), KEY(1, 0, KEY_UP), KEY(1, 1, KEY_ENTER), KEY(1, 2, KEY_DOWN), @@ -496,12 +492,8 @@ static struct twl4030_gpio_platform_data cm_t35_gpio_data = { };
static struct twl4030_platform_data cm_t35_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .keypad = &cm_t35_kp_data, - .usb = &cm_t35_usb_data, .gpio = &cm_t35_gpio_data, .vmmc1 = &cm_t35_vmmc1, .vsim = &cm_t35_vsim, @@ -511,6 +503,7 @@ static struct twl4030_platform_data cm_t35_twldata = {
static void __init cm_t35_init_i2c(void) { + omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB, 0); omap3_pmic_init("tps65930", &cm_t35_twldata); }
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 34956ec..aa6a173 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -331,25 +331,9 @@ static struct regulator_init_data devkit8000_vio = { .consumer_supplies = &devkit8000_vio_supply, };
-static struct twl4030_usb_data devkit8000_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct twl4030_codec_audio_data devkit8000_audio_data; - -static struct twl4030_codec_data devkit8000_codec_data = { - .audio_mclk = 26000000, - .audio = &devkit8000_audio_data, -}; - static struct twl4030_platform_data devkit8000_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .usb = &devkit8000_usb_data, .gpio = &devkit8000_gpio_data, - .codec = &devkit8000_codec_data, .vmmc1 = &devkit8000_vmmc1, .vdac = &devkit8000_vdac, .vpll1 = &devkit8000_vpll1, @@ -359,6 +343,8 @@ static struct twl4030_platform_data devkit8000_twldata = {
static int __init devkit8000_i2c_init(void) { + omap3_pmic_get_config(&devkit8000_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, 0); omap3_pmic_init("tps65930", &devkit8000_twldata); /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 0c1bfca..bb3723a 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -440,10 +440,6 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = { .setup = igep_twl_gpio_setup, };
-static struct twl4030_usb_data igep_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static int igep2_enable_dvi(struct omap_dss_device *dssdev) { gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1); @@ -519,13 +515,6 @@ static void __init igep_init_early(void) m65kxxxxam_sdrc_params); }
-static struct twl4030_codec_audio_data igep2_audio_data; - -static struct twl4030_codec_data igep2_codec_data = { - .audio_mclk = 26000000, - .audio = &igep2_audio_data, -}; - static int igep2_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -558,11 +547,7 @@ static struct twl4030_keypad_data igep2_keypad_pdata = { };
static struct twl4030_platform_data igep_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .usb = &igep_usb_data, .gpio = &igep_twl4030_gpio_pdata, .vmmc1 = &igep_vmmc1, .vio = &igep_vio, @@ -578,6 +563,8 @@ static void __init igep_i2c_init(void) { int ret;
+ omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB, 0); + if (machine_is_igep0020()) { /* * Bus 3 is attached to the DVI port where devices like the @@ -588,9 +575,10 @@ static void __init igep_i2c_init(void) if (ret) pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
- igep_twldata.codec = &igep2_codec_data; igep_twldata.keypad = &igep2_keypad_pdata; igep_twldata.vpll2 = &igep2_vpll2; + /* Use common codec data */ + omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, 0); }
omap3_pmic_init("twl4030", &igep_twldata); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index f7d6038..6ff564a 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -199,20 +199,12 @@ static void __init omap_ldp_init_early(void) omap2_init_common_devices(NULL, NULL); }
-static struct twl4030_usb_data ldp_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static struct twl4030_gpio_platform_data ldp_gpio_data = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, };
-static struct twl4030_madc_platform_data ldp_madc_data = { - .irq_line = 1, -}; - static struct regulator_consumer_supply ldp_vmmc1_supply = { .supply = "vmmc", }; @@ -253,12 +245,7 @@ static struct regulator_init_data ldp_vaux1 = { };
static struct twl4030_platform_data ldp_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .madc = &ldp_madc_data, - .usb = &ldp_usb_data, .vmmc1 = &ldp_vmmc1, .vaux1 = &ldp_vaux1, .gpio = &ldp_gpio_data, @@ -267,6 +254,8 @@ static struct twl4030_platform_data ldp_twldata = {
static int __init omap_i2c_init(void) { + omap3_pmic_get_config(&ldp_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0); omap3_pmic_init("twl4030", &ldp_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 7f21d24..63104e8 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -384,25 +384,9 @@ static struct regulator_init_data beagle_vpll2 = { .consumer_supplies = beagle_vdvi_supplies, };
-static struct twl4030_usb_data beagle_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct twl4030_codec_audio_data beagle_audio_data; - -static struct twl4030_codec_data beagle_codec_data = { - .audio_mclk = 26000000, - .audio = &beagle_audio_data, -}; - static struct twl4030_platform_data beagle_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .usb = &beagle_usb_data, .gpio = &beagle_gpio_data, - .codec = &beagle_codec_data, .vmmc1 = &beagle_vmmc1, .vsim = &beagle_vsim, .vdac = &beagle_vdac, @@ -417,6 +401,8 @@ static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
static int __init omap3_beagle_i2c_init(void) { + omap3_pmic_get_config(&beagle_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, 0); omap3_pmic_init("twl4030", &beagle_twldata); /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index b4d4346..3e7e902 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -400,10 +400,6 @@ static struct twl4030_gpio_platform_data omap3evm_gpio_data = { .setup = omap3evm_twl_gpio_setup, };
-static struct twl4030_usb_data omap3evm_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static uint32_t board_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_DOWN), @@ -438,17 +434,6 @@ static struct twl4030_keypad_data omap3evm_kp_data = { .rep = 1, };
-static struct twl4030_madc_platform_data omap3evm_madc_data = { - .irq_line = 1, -}; - -static struct twl4030_codec_audio_data omap3evm_audio_data; - -static struct twl4030_codec_data omap3evm_codec_data = { - .audio_mclk = 26000000, - .audio = &omap3evm_audio_data, -}; - static struct regulator_consumer_supply omap3_evm_vdda_dac_supply = REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
@@ -548,15 +533,9 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = { #endif
static struct twl4030_platform_data omap3evm_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .keypad = &omap3evm_kp_data, - .madc = &omap3evm_madc_data, - .usb = &omap3evm_usb_data, .gpio = &omap3evm_gpio_data, - .codec = &omap3evm_codec_data, .vdac = &omap3_evm_vdac, .vpll2 = &omap3_evm_vpll2, .vio = &omap3evm_vio, @@ -566,6 +545,9 @@ static struct twl4030_platform_data omap3evm_twldata = {
static int __init omap3_evm_i2c_init(void) { + omap3_pmic_get_config(&omap3evm_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | + TWL_COMMON_PDATA_AUDIO, 0); omap3_pmic_init("twl4030", &omap3evm_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 23f71d4..7bfe109 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -501,25 +501,10 @@ static struct platform_device pandora_vwlan_device = { }, };
-static struct twl4030_usb_data omap3pandora_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct twl4030_codec_audio_data omap3pandora_audio_data; - -static struct twl4030_codec_data omap3pandora_codec_data = { - .audio_mclk = 26000000, - .audio = &omap3pandora_audio_data, -}; - static struct twl4030_bci_platform_data pandora_bci_data;
static struct twl4030_platform_data omap3pandora_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, .gpio = &omap3pandora_gpio_data, - .usb = &omap3pandora_usb_data, - .codec = &omap3pandora_codec_data, .vmmc1 = &pandora_vmmc1, .vmmc2 = &pandora_vmmc2, .vdac = &pandora_vdac, @@ -541,6 +526,8 @@ static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
static int __init omap3pandora_i2c_init(void) { + omap3_pmic_get_config(&omap3pandora_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, 0); omap3_pmic_init("tps65950", &omap3pandora_twldata); /* i2c2 pins are not connected */ omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo, diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 0c108a2..2b52281 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -354,10 +354,6 @@ static struct twl4030_gpio_platform_data omap3stalker_gpio_data = { .setup = omap3stalker_twl_gpio_setup, };
-static struct twl4030_usb_data omap3stalker_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static uint32_t board_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_DOWN), @@ -392,17 +388,6 @@ static struct twl4030_keypad_data omap3stalker_kp_data = { .rep = 1, };
-static struct twl4030_madc_platform_data omap3stalker_madc_data = { - .irq_line = 1, -}; - -static struct twl4030_codec_audio_data omap3stalker_audio_data; - -static struct twl4030_codec_data omap3stalker_codec_data = { - .audio_mclk = 26000000, - .audio = &omap3stalker_audio_data, -}; - static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply = REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
@@ -443,15 +428,9 @@ static struct regulator_init_data omap3_stalker_vpll2 = { };
static struct twl4030_platform_data omap3stalker_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .keypad = &omap3stalker_kp_data, - .madc = &omap3stalker_madc_data, - .usb = &omap3stalker_usb_data, .gpio = &omap3stalker_gpio_data, - .codec = &omap3stalker_codec_data, .vdac = &omap3_stalker_vdac, .vpll2 = &omap3_stalker_vpll2, .vmmc1 = &omap3stalker_vmmc1, @@ -474,6 +453,9 @@ static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = {
static int __init omap3_stalker_i2c_init(void) { + omap3_pmic_get_config(&omap3stalker_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | + TWL_COMMON_PDATA_AUDIO, 0); omap3_pmic_init("twl4030", &omap3stalker_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3, diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 5f649fa..094ea80 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -236,25 +236,9 @@ static struct regulator_init_data touchbook_vpll2 = { .consumer_supplies = &touchbook_vdvi_supply, };
-static struct twl4030_usb_data touchbook_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct twl4030_codec_audio_data touchbook_audio_data; - -static struct twl4030_codec_data touchbook_codec_data = { - .audio_mclk = 26000000, - .audio = &touchbook_audio_data, -}; - static struct twl4030_platform_data touchbook_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .usb = &touchbook_usb_data, .gpio = &touchbook_gpio_data, - .codec = &touchbook_codec_data, .vmmc1 = &touchbook_vmmc1, .vsim = &touchbook_vsim, .vdac = &touchbook_vdac, @@ -270,8 +254,9 @@ static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { static int __init omap3_touchbook_i2c_init(void) { /* Standard TouchBook bus */ + omap3_pmic_get_config(&touchbook_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, 0); omap3_pmic_init("twl4030", &touchbook_twldata); - /* Additional TouchBook bus */ omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo, ARRAY_SIZE(touchBook_i2c_boardinfo)); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 175e1ab..f334829 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -433,10 +433,6 @@ static struct twl4030_gpio_platform_data overo_gpio_data = { .setup = overo_twl_gpio_setup, };
-static struct twl4030_usb_data overo_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static struct regulator_init_data overo_vmmc1 = { .constraints = { .min_uV = 1850000, @@ -480,19 +476,8 @@ static struct regulator_init_data overo_vpll2 = { .consumer_supplies = overo_vdds_dsi_supply, };
-static struct twl4030_codec_audio_data overo_audio_data; - -static struct twl4030_codec_data overo_codec_data = { - .audio_mclk = 26000000, - .audio = &overo_audio_data, -}; - static struct twl4030_platform_data overo_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, .gpio = &overo_gpio_data, - .usb = &overo_usb_data, - .codec = &overo_codec_data, .vmmc1 = &overo_vmmc1, .vdac = &overo_vdac, .vpll2 = &overo_vpll2, @@ -500,6 +485,8 @@ static struct twl4030_platform_data overo_twldata = {
static int __init overo_i2c_init(void) { + omap3_pmic_get_config(&overo_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, 0); omap3_pmic_init("tps65950", &overo_twldata); /* i2c2 pins are used for gpio */ omap_register_i2c_bus(3, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 42d10b1..62d6675 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -79,20 +79,14 @@ static struct twl4030_gpio_platform_data rm680_gpio_data = { .pulldowns = BIT(1) | BIT(2) | BIT(8) | BIT(15), };
-static struct twl4030_usb_data rm680_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static struct twl4030_platform_data rm680_twl_data = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, .gpio = &rm680_gpio_data, - .usb = &rm680_usb_data, /* add rest of the children here */ };
static void __init rm680_i2c_init(void) { + omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0); omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 9903667..dc69a7f 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -288,10 +288,6 @@ static struct twl4030_keypad_data rx51_kp_data = { .rep = 1, };
-static struct twl4030_madc_platform_data rx51_madc_data = { - .irq_line = 1, -}; - /* Enable input logic and pull all lines up when eMMC is on. */ static struct omap_board_mux rx51_mmc2_on_mux[] = { OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), @@ -600,10 +596,6 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = { .setup = rx51_twlgpio_setup, };
-static struct twl4030_usb_data rx51_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static struct twl4030_ins sleep_on_seq[] __initdata = { /* * Turn off everything @@ -775,14 +767,9 @@ struct twl4030_codec_data rx51_codec_data __initdata = { };
static struct twl4030_platform_data rx51_twldata __initdata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .gpio = &rx51_gpio_data, .keypad = &rx51_kp_data, - .madc = &rx51_madc_data, - .usb = &rx51_usb_data, .power = &rx51_t2scripts_data, .codec = &rx51_codec_data,
@@ -847,6 +834,8 @@ static int __init rx51_i2c_init(void) rx51_twldata.vaux3 = &rx51_vaux3_cam; } rx51_twldata.vmmc2 = &rx51_vmmc2; + omap3_pmic_get_config(&rx51_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0); omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 118c6f5..58c0c6e 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -292,26 +292,6 @@ static void zoom2_set_hs_extmute(int mute) gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute); }
-static int zoom_batt_table[] = { -/* 0 C*/ -30800, 29500, 28300, 27100, -26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, -17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100, -11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310, -8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830, -5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170, -4040, 3910, 3790, 3670, 3550 -}; - -static struct twl4030_bci_platform_data zoom_bci_data = { - .battery_tmp_tbl = zoom_batt_table, - .tblsize = ARRAY_SIZE(zoom_batt_table), -}; - -static struct twl4030_usb_data zoom_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static struct twl4030_gpio_platform_data zoom_gpio_data = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, @@ -319,28 +299,10 @@ static struct twl4030_gpio_platform_data zoom_gpio_data = { .setup = zoom_twl_gpio_setup, };
-static struct twl4030_madc_platform_data zoom_madc_data = { - .irq_line = 1, -}; - -static struct twl4030_codec_audio_data zoom_audio_data; - -static struct twl4030_codec_data zoom_codec_data = { - .audio_mclk = 26000000, - .audio = &zoom_audio_data, -}; - static struct twl4030_platform_data zoom_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .bci = &zoom_bci_data, - .madc = &zoom_madc_data, - .usb = &zoom_usb_data, .gpio = &zoom_gpio_data, .keypad = &zoom_kp_twl4030_data, - .codec = &zoom_codec_data, .vmmc1 = &zoom_vmmc1, .vmmc2 = &zoom_vmmc2, .vsim = &zoom_vsim, @@ -350,10 +312,17 @@ static struct twl4030_platform_data zoom_twldata = {
static int __init omap_i2c_init(void) { + omap3_pmic_get_config(&zoom_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI | + TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO, 0); + if (machine_is_omap_zoom2()) { - zoom_audio_data.ramp_delay_value = 3; /* 161 ms */ - zoom_audio_data.hs_extmute = 1; - zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute; + struct twl4030_codec_audio_data *audio_data; + audio_data = zoom_twldata.codec->audio; + + audio_data->ramp_delay_value = 3; /* 161 ms */ + audio_data->hs_extmute = 1; + audio_data->set_hs_extmute = zoom2_set_hs_extmute; } omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata); omap_register_i2c_bus(2, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 5fd644e..2487e3c 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -56,6 +56,37 @@ static struct twl4030_usb_data omap4_usb_pdata = { .phy_suspend = omap4430_phy_suspend, };
+static struct twl4030_usb_data omap3_usb_pdata = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static int omap3_batt_table[] = { +/* 0 C */ +30800, 29500, 28300, 27100, +26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, +17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100, +11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310, +8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830, +5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170, +4040, 3910, 3790, 3670, 3550 +}; + +static struct twl4030_bci_platform_data omap3_bci_pdata = { + .battery_tmp_tbl = omap3_batt_table, + .tblsize = ARRAY_SIZE(omap3_batt_table), +}; + +static struct twl4030_madc_platform_data omap3_madc_pdata = { + .irq_line = 1, +}; + +static struct twl4030_codec_audio_data omap3_audio; + +static struct twl4030_codec_data omap3_codec_pdata = { + .audio_mclk = 26000000, + .audio = &omap3_audio, +}; + static struct regulator_init_data omap4_vdac_idata = { .constraints = { .min_uV = 1800000, @@ -207,3 +238,25 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, !pmic_data->clk32kg) pmic_data->clk32kg = &omap4_clk32kg_idata; } + +void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, + u32 pdata_flags, u32 regulators_flags) +{ + if (!pmic_data->irq_base) + pmic_data->irq_base = TWL4030_IRQ_BASE; + if (!pmic_data->irq_end) + pmic_data->irq_end = TWL4030_IRQ_END; + + /* Common platform data configurations */ + if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) + pmic_data->usb = &omap3_usb_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci) + pmic_data->bci = &omap3_bci_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc) + pmic_data->madc = &omap3_madc_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->codec) + pmic_data->codec = &omap3_codec_pdata; +} diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index d96c289..3b4b05d 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -2,6 +2,9 @@ #define __OMAP_PMIC_COMMON__
#define TWL_COMMON_PDATA_USB (1 << 0) +#define TWL_COMMON_PDATA_BCI (1 << 1) +#define TWL_COMMON_PDATA_MADC (1 << 2) +#define TWL_COMMON_PDATA_AUDIO (1 << 3)
/* Common LDO regulators for TWL4030/TWL6030 */ #define TWL_COMMON_REGULATOR_VDAC (1 << 0) @@ -42,6 +45,9 @@ static inline void omap4_pmic_init(const char *pmic_type, omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); }
+void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, + u32 pdata_flags, u32 regulators_flags); + void omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags);