To ensure we are in a known state, exiting from reset at the point of probe or in system resume, assert reset before we de-assert it.
Since the BIOS may enter into a pre-boot environment to control the amps (for example for boot beep), we need to ensure we start from a known, reset state prior to probe or system resume.
Signed-off-by: Stefan Binding sbinding@opensource.cirrus.com --- sound/pci/hda/cs35l41_hda.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c index 919e38213975..1ac721085fb5 100644 --- a/sound/pci/hda/cs35l41_hda.c +++ b/sound/pci/hda/cs35l41_hda.c @@ -840,6 +840,7 @@ static int cs35l41_system_resume(struct device *dev) }
if (cs35l41->reset_gpio) { + gpiod_set_value_cansleep(cs35l41->reset_gpio, 0); usleep_range(2000, 2100); gpiod_set_value_cansleep(cs35l41->reset_gpio, 1); } @@ -1693,6 +1694,7 @@ int cs35l41_hda_probe(struct device *dev, const char *device_name, int id, int i } } if (cs35l41->reset_gpio) { + gpiod_set_value_cansleep(cs35l41->reset_gpio, 0); usleep_range(2000, 2100); gpiod_set_value_cansleep(cs35l41->reset_gpio, 1); }