Lichee Pi Zero features a dock, which adds some functions, and should be soldered with the core board of Lichee Pi Zero.
Add support for the dock as a new dts, as soldering is needed to make the dock usable and there's functions enabled on the dock that is unavailable at the 2.54mm pins of the core board.
Signed-off-by: Icenowy Zheng icenowy@aosc.xyz --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts | 67 ++++++++++++++++++++++ 2 files changed, 69 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 011808490fed..1aa365306479 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -876,7 +876,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-plus.dtb \ sun8i-h3-orangepi-plus2e.dtb \ sun8i-r16-parrot.dtb \ - sun8i-v3s-licheepi-zero.dtb + sun8i-v3s-licheepi-zero.dtb \ + sun8i-v3s-licheepi-zero-dock.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts new file mode 100644 index 000000000000..0ce92dadc07b --- /dev/null +++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts @@ -0,0 +1,67 @@ +/* + * Copyright (C) 2016 Icenowy Zheng icenowy@aosc.xyz + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun8i-v3s-licheepi-zero.dts" + +/ { + model = "Lichee Pi Zero with Dock"; + compatible = "licheepi,licheepi-zero-dock", "licheepi,licheepi-zero", + "allwinner,sun8i-v3s"; +}; + +&codec { + allwinner,audio-routing = + "Headphone", "HP", + "Headphone", "HPCOM", + "MIC1", "Mic", + "Mic", "HBIAS"; + status = "okay"; +}; + +&mmc1 { + pinctrl-0 = <&mmc1_pins>; + pinctrl-names = "default"; + broken-cd; + bus-width = <4>; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +};