On Thu, 20 Apr 2023, Herve Codina wrote:
On Thu, 20 Apr 2023 13:39:46 +0100 Lee Jones lee@kernel.org wrote:
On Mon, 17 Apr 2023, Herve Codina wrote:
The Lantiq PEF2256 is a framer and line interface component designed to fulfill all required interfacing between an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus.
Signed-off-by: Herve Codina herve.codina@bootlin.com
drivers/mfd/Kconfig | 16 + drivers/mfd/Makefile | 1 + drivers/mfd/pef2256-regs.h | 250 ++++++++++ drivers/mfd/pef2256.c | 950 ++++++++++++++++++++++++++++++++++++
95% of this driver needs to be moved somewhere else.
What is a Framer? Perhaps sound/ is a good candidate?
The pef2256 framer is a device that transfers data to/from a TDM (time-slots data) from/to quite old telecommunication lines (E1 in my case). Several subsystem can set/get data to/from the TDM. Each device using their own time-slots set.
On my use-case, I have some audio consumer and a not yet upstreamed HDLC consumer. Both of them uses the framer to know the E1 link state. The framer needs to be initialized 'globally' and not by a specific consumer as several consumers can use the framer.
I can't think of a good place for this.
If all else fails, it's drivers/misc
include/linux/mfd/pef2256.h | 52 ++ 5 files changed, 1269 insertions(+) create mode 100644 drivers/mfd/pef2256-regs.h create mode 100644 drivers/mfd/pef2256.c create mode 100644 include/linux/mfd/pef2256.h
[...]
+static int pef2256_add_audio_devices(struct pef2256 *pef2256) +{
- const char *compatible = "lantiq,pef2256-codec";
- struct mfd_cell *audio_devs;
- struct device_node *np;
- unsigned int count = 0;
- unsigned int i;
- int ret;
- for_each_available_child_of_node(pef2256->dev->of_node, np) {
if (of_device_is_compatible(np, compatible))count++;- }
Converting Device Tree nodes into MFD cells to register with the Platform Device API is not a reasonable use-case of MFD.
Have the CODEC driver match on "lantiq,pef2256-codec" and let it instantiate itself.
As the framer is going to used by several subsystem, I cannot instantiate it in the specific ASoC subsystem.
Your first version using of_platform_populate() was closer to the mark.
The issue was that I need MFD cells for the pinctrl part.
Why can't it be represented in DT?
- if (!count)
return 0;- audio_devs = kcalloc(count, sizeof(*audio_devs), GFP_KERNEL);
- if (!audio_devs)
return -ENOMEM;- for (i = 0; i < count; i++) {
(audio_devs + i)->name = "lantiq-pef2256-codec";(audio_devs + i)->of_compatible = compatible;(audio_devs + i)->id = i;- }
- ret = mfd_add_devices(pef2256->dev, 0, audio_devs, count, NULL, 0, NULL);
- kfree(audio_devs);
- return ret;
+}