Hi,
On Tue, Feb 18, 2014 at 10:23:29AM +0900, Mark Brown wrote:
On Mon, Feb 17, 2014 at 11:04:17AM +0100, Markus Pargmann wrote:
Optional properties:
- reset-gpios: Reset-GPIO phandle with args as described in gpio/gpio.txt
- clocks/clock-names: Clock named 'mclk' for the master clock of the codec.
- See clock/clock-bindings.txt for information about the detailed format.
Looking at the code the clock isn't physically optional, why not make it mandatory? There's only one mainline user, it looks like it should be straightforward to update with a fixed clock.
The masterclock is physically optional. There are several modes to use this codec without master clock. The PLL can use different clock inputs, BCLK, MCLK, etc. and even the PLL is not necessary. Instead BCLK and so on can be used as direct codec clock input. However, most of this is not supported by the driver yet and I can't test these cases.
- aic32x4->mclk = devm_clk_get(&i2c->dev, "mclk");
- if (IS_ERR(aic32x4->mclk))
dev_info(&i2c->dev, "No mclk found, continuing without clock\n");This is going to break with deferred probe, we need to handle that at least.
Yes, I fixed this.
Thanks,
Markus