On Thu, 12 Jan 2012 07:42:19 +0100Takashi Iwai tiwai@suse.de wrote:
At Thu, 12 Jan 2012 00:15:56 +0100,> Torsten Schenk wrote:> > > > /*> > - * calculated with $value[i] = 128 \cdot sqrt[3]{\frac{i}{128}}$> > - * this is done because the linear values cause rapid degredation> > - * of volume in the uppermost region.> > - */> > -static const u8 log_volume_table[128] = {> > - 0x00, 0x19, 0x20, 0x24, 0x28, 0x2b, 0x2e, 0x30, 0x32, 0x34,> > - 0x36, 0x38, 0x3a, 0x3b, 0x3d, 0x3e, 0x40, 0x41, 0x42, 0x43,> > - 0x44, 0x46, 0x47, 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e,> > - 0x4e, 0x4f, 0x50, 0x51, 0x52, 0x53, 0x53, 0x54, 0x55, 0x56,> > - 0x56, 0x57, 0x58, 0x58, 0x59, 0x5a, 0x5b, 0x5b, 0x5c, 0x5c,> > - 0x5d, 0x5e, 0x5e, 0x5f, 0x60, 0x60, 0x61, 0x61, 0x62, 0x62,> > - 0x63, 0x63, 0x64, 0x65, 0x65, 0x66, 0x66, 0x67, 0x67, 0x68,> > - 0x68, 0x69, 0x69, 0x6a, 0x6a, 0x6b, 0x6b, 0x6c, 0x6c, 0x6c,> > - 0x6d, 0x6d, 0x6e, 0x6e, 0x6f, 0x6f, 0x70, 0x70, 0x70, 0x71,> > - 0x71, 0x72, 0x72, 0x73, 0x73, 0x73, 0x74, 0x74, 0x75, 0x75,> > - 0x75, 0x76, 0x76, 0x77, 0x77, 0x77, 0x78, 0x78, 0x78, 0x79,> > - 0x79, 0x7a, 0x7a, 0x7a, 0x7b, 0x7b, 0x7b, 0x7c, 0x7c, 0x7c,> > - 0x7d, 0x7d, 0x7d, 0x7e, 0x7e, 0x7e, 0x7f, 0x7f };> > So, with the new implementation, you don't need the linear -> dB> conversion?I decided to change the volume slider behaviour because of theadditional information I got on the DAC. On the other hand it seemsreasonable to do that in a separate patch. I could do so in my nextsubmit. > > .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,> > - .info = usb6fire_control_master_vol_info,> > - .get = usb6fire_control_master_vol_get,> > - .put = usb6fire_control_master_vol_put> > + .info = usb6fire_control_output_vol_info,> > + .get = usb6fire_control_output_vol_get,> > + .put = usb6fire_control_output_vol_put,> > + .private_value = 1> > },> > {> > .iface = SNDRV_CTL_ELEM_IFACE_MIXER,> > + .name = "Output 5/6 Playback Volume",> > + .index = 0,> > + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,> > + .info = usb6fire_control_output_vol_info,> > + .get = usb6fire_control_output_vol_get,> > + .put = usb6fire_control_output_vol_put,> > + .private_value = 2> > + }> > +};> > Add the terminator in this patch. I know you fixed in the last patch> but, In general, try not to introduce a bug in each commit. Otherwise> it'll make bisection difficult.That's right, I've overseen this problem in the first place andstumbled upon it after patch 2 and 3 have already been sent.
Thanks,Torsten