The patch
ASoC: rt5663: Delay and retry reading rt5663 ID register
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From ba68fa318442d25586d057c1e8c9165bdc62c1b3 Mon Sep 17 00:00:00 2001
From: Oder Chiou oder_chiou@realtek.com Date: Thu, 9 Nov 2017 19:28:10 +0800 Subject: [PATCH] ASoC: rt5663: Delay and retry reading rt5663 ID register
In the probe, the codec may not be ready for I2C reading or there are some glitches on the i2c line. So if the i2c reading value is incorrect, it will read again after delay. This issue is similar the patch https://patchwork.kernel.org/patch/9681421/. In current project, these 2 devices were connected to the same i2c line, and they met the same problem.
Signed-off-by: Oder Chiou oder_chiou@realtek.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/codecs/rt5663.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/rt5663.c b/sound/soc/codecs/rt5663.c index 767f219f6c42..eb3065a992ab 100644 --- a/sound/soc/codecs/rt5663.c +++ b/sound/soc/codecs/rt5663.c @@ -3428,7 +3428,16 @@ static int rt5663_i2c_probe(struct i2c_client *i2c, ret); return ret; } - regmap_read(regmap, RT5663_VENDOR_ID_2, &val); + + ret = regmap_read(regmap, RT5663_VENDOR_ID_2, &val); + if (ret || (val != RT5663_DEVICE_ID_2 && val != RT5663_DEVICE_ID_1)) { + dev_err(&i2c->dev, + "Device with ID register %#x is not rt5663, retry one time.\n", + val); + msleep(100); + regmap_read(regmap, RT5663_VENDOR_ID_2, &val); + } + switch (val) { case RT5663_DEVICE_ID_2: rt5663->regmap = devm_regmap_init_i2c(i2c, &rt5663_v2_regmap);