GQSPI supports two chip select CS0 & CS1. Update the driver to assert/de-assert the appropriate chip select as per the bits set in qspi->cs_index_mask.
Signed-off-by: Amit Kumar Mahapatra amit.kumar-mahapatra@amd.com --- drivers/spi/spi-zynqmp-gqspi.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-)
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c index 319cdd5a0bdc..4759f704bf5c 100644 --- a/drivers/spi/spi-zynqmp-gqspi.c +++ b/drivers/spi/spi-zynqmp-gqspi.c @@ -156,6 +156,9 @@ #define GQSPI_FREQ_100MHZ 100000000 #define GQSPI_FREQ_150MHZ 150000000
+#define GQSPI_SELECT_LOWER_CS BIT(0) +#define GQSPI_SELECT_UPPER_CS BIT(1) + #define SPI_AUTOSUSPEND_TIMEOUT 3000 enum mode_type {GQSPI_MODE_IO, GQSPI_MODE_DMA};
@@ -467,15 +470,17 @@ static void zynqmp_qspi_chipselect(struct spi_device *qspi, bool is_high)
genfifoentry |= GQSPI_GENFIFO_MODE_SPI;
+ if (qspi->cs_index_mask & GQSPI_SELECT_UPPER_CS) { + zynqmp_gqspi_selectslave(xqspi, + GQSPI_SELECT_FLASH_CS_UPPER, + GQSPI_SELECT_FLASH_BUS_LOWER); + } else if (qspi->cs_index_mask & GQSPI_SELECT_LOWER_CS) { + zynqmp_gqspi_selectslave(xqspi, + GQSPI_SELECT_FLASH_CS_LOWER, + GQSPI_SELECT_FLASH_BUS_LOWER); + } + genfifoentry |= xqspi->genfifobus; if (!is_high) { - if (!spi_get_chipselect(qspi, 0)) { - xqspi->genfifobus = GQSPI_GENFIFO_BUS_LOWER; - xqspi->genfifocs = GQSPI_GENFIFO_CS_LOWER; - } else { - xqspi->genfifobus = GQSPI_GENFIFO_BUS_UPPER; - xqspi->genfifocs = GQSPI_GENFIFO_CS_UPPER; - } - genfifoentry |= xqspi->genfifobus; genfifoentry |= xqspi->genfifocs; genfifoentry |= GQSPI_GENFIFO_CS_SETUP; } else {