Signed-off-by: Adam Thomson Adam.Thomson.Opensource@diasemi.com --- Documentation/devicetree/bindings/sound/da7218.txt | 116 +++++++++++++++++++++ 1 file changed, 116 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/da7218.txt
diff --git a/Documentation/devicetree/bindings/sound/da7218.txt b/Documentation/devicetree/bindings/sound/da7218.txt new file mode 100644 index 0000000..ae7053d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/da7218.txt @@ -0,0 +1,116 @@ +Dialog Semiconductor DA7218 Audio Codec bindings + +DA7218 is an audio codec with HP detect feature. + +====== + +Required properties: +- compatible : Should be "dlg,da7217" or "dlg,da7218" +- reg: Specifies the I2C slave address + +- VDD-supply: VDD power supply for the device +- VDDMIC-supply: VDDMIC power supply for the device +- VDDIO-supply: VDDIO power supply for the device + (See Documentation/devicetree/bindings/regulator/regulator.txt for further + information relating to regulators) + +Optional properties: +- interrupt-parent: Specifies the phandle of the interrupt controller to which + the IRQs from DA7218 are delivered to. +- interrupts: IRQ line info for DA7218 chip. + (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for + further information relating to interrupt properties) +- interrupt-names : Name associated with interrupt line. Should be "wakeup" if + interrupt is to be used to wake system, otherwise "irq" should be used. +- wakeup-source: Flag to indicate this device can wake system (suspend/resume). + +- clocks : phandle and clock specifier for codec MCLK. +- clock-names : Clock name string for 'clocks' attribute, should be "mclk". + +- dlg,ldo-lvl : Required internal LDO voltage (mV) level + [<1050>, <1100>, <1200>, <1400>] +- dlg,micbias1-lvl : Voltage (mV) for Mic Bias 1 + [<1200>, <1600>, <1800>, <2000>, <2200>, <2400>, <2600>, <2800>, <3000>] +- dlg,micbias2-lvl : Voltage (mV) for Mic Bias 2 + [<1200>, <1600>, <1800>, <2000>, <2200>, <2400>, <2600>, <2800>, <3000>] +- dlg,mic1-amp-in-sel : Mic1 input source type + ["diff", "se_p", "se_n"] +- dlg,mic2-amp-in-sel : Mic2 input source type + ["diff", "se_p", "se_n"] +- dlg,dmic1-data-sel : DMIC1 channel select based on clock edge. + ["lrise_rfall", "lfall_rrise"] +- dlg,dmic1-samplephase : When to sample audio from DMIC1. + ["on_clkedge", "between_clkedge"] +- dlg,dmic1-clkrate : DMic1 clock frequency (Hz). + [<1500000>, <3000000>] +- dlg,dmic2-data-sel : DMic2 channel select based on clock edge. + ["lrise_rfall", "lfall_rrise"] +- dlg,dmic2-samplephase : When to sample audio from DMic2. + ["on_clkedge", "between_clkedge"] +- dlg,dmic2-clkrate : DMic2 clock frequency (Hz). + [<1500000>, <3000000>] +- dlg,biquad-cfg : List of data & address pairs to configure BiQuad filters + [ < {data1} {addr1} {data2} {addr2} ... >; ] +- dlg,st-biquad-cfg : List of data & address pairs to configure Sidetone + BiQuad filters + [ < {data1} {addr1} {data2} {addr2} ... >; ] +- dlg,hp-diff-single-supply : Boolean flag, use single supply for HP + (DA7217 only) + +====== + +Optional Child node - 'da7218_hpldet' (DA7218 only): + +Optional properties: +- dlg,jack-rate : Time between jack detect measurements (us) + [<5>, <10>, <20>, <40>, <80>, <160>, <320>, <640>] +- dlg,jack-debounce : Number of debounce measurements taken for jack detect + [<0>, <2>, <3>, <4>] +- dlg,jack-threshold : Threshold level for jack detection (% of VDD) + [<84>, <88>, <92>, <96>] +- dlg,comp-inv : Boolean flag, invert comparator output +- dlg,hyst : Boolean flag, enable hysteresis +- dlg,discharge : Boolean flag, auto discharge of Mic Bias on jack removal + +====== + +Example: + + codec: da7218@1a { + compatible = "dlg,da7218"; + reg = <0x1a>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + wakeup-source; + + VDD-supply = <®_audio>; + VDDMIC-supply = <®_audio>; + VDDIO-supply = <®_audio>; + + clocks = <&clks 201>; + clock-names = "mclk"; + + dlg,ldo-lvl = <1200>; + + dlg,micbias1-lvl = <2600>; + dlg,micbias2-lvl = <2600>; + dlg,mic1-amp-in-sel = "diff"; + dlg,mic2-amp-in-sel = "diff"; + + dlg,dmic1-data-sel = "lrise_rfall"; + dlg,dmic1-samplephase = "on_clkedge"; + dlg,dmic1-clkrate = <3000000>; + dlg,dmic2-data-sel = "lrise_rfall"; + dlg,dmic2-samplephase = "on_clkedge"; + dlg,dmic2-clkrate = <3000000>; + + dlg,biquad-cfg = <0x9c 0x00 0x40 0x01 0xd0 0x02 0x81 0x03>; + dlg,st-biquad-cfg = <0x00 0x00 0x40 0x01 0x00 0x02 0x00 0x03>; + + da7218_hpldet { + dlg,jack-rate = <40>; + dlg,jack-debounce = <2>; + dlg,jack-threshold = <84>; + dlg,hyst; + }; + };