On Sun, Oct 12, 2014 at 10:39:11PM +0100, Jean-Michel Hautbois wrote:
Some systems may require a different resistor than the default one (4K). This adds a property in sgtl5000 codec. It keeps the default of 4K when nothing is specified so it does not break existing code.
v2: modify the default case on DT parsing
Signed-off-by: Jean-Michel Hautbois jean-michel.hautbois@vodalys.com
.../devicetree/bindings/sound/sgtl5000.txt | 10 ++++ sound/soc/codecs/sgtl5000.c | 60 ++++++++++++++++++++-- 2 files changed, 66 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt index 955df60..dd38f84 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt @@ -7,10 +7,20 @@ Required properties:
- clocks : the clock provider of SYS_MCLK
+- sgtl5000-micbias-resistor : the bias resistor to be used
1 or SGTL5000_MICBIAS_2K - MICBIAS resistor is set to 2K
2 or SGTL5000_MICBIAS_4K - MICBIAS resistor is set to 4K
3 or SGTL5000_MICBIAS_8K - MICBIAS resistor is set to 8K
0 or SGTL5000_MICBIAS_OFF - MICBIAS resistor is not used
- If this node is not mentioned or if the value is unknown, then
- micbias resistor is set to 4K.
The SGTL5000_MICBIAS_* constants aren't in a DT header, so shouldn't be referenced here.
Why not have mcbias-resistor-k-ohms as 2, 4, 8, or 0?
That would be much easier to read as a human.
Thanks, Mark.
Example:
codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks 150>;
- sgtl5000-micbias-resistor = <1>;
}; diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 6bb77d7..a255754 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -121,6 +121,13 @@ struct ldo_regulator { bool enabled; };
+enum sgtl5000_micbias_resistor {
- SGTL5000_MICBIAS_OFF = 0,
- SGTL5000_MICBIAS_2K = 1,
- SGTL5000_MICBIAS_4K = 2,
- SGTL5000_MICBIAS_8K = 3,
+};
/* sgtl5000 private structure in codec */ struct sgtl5000_priv { int sysclk; /* sysclk rate */ @@ -131,6 +138,7 @@ struct sgtl5000_priv { struct regmap *regmap; struct clk *mclk; int revision;
- enum sgtl5000_micbias_resistor micbias_resistor;
};
/* @@ -145,12 +153,14 @@ struct sgtl5000_priv { static int mic_bias_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) {
- struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(w->codec);
- switch (event) { case SND_SOC_DAPM_POST_PMU:
/* change mic bias resistor to 4Kohm */
snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL,/* change mic bias resistor */
SGTL5000_BIAS_R_MASK,
SGTL5000_BIAS_R_4k << SGTL5000_BIAS_R_SHIFT);
SGTL5000_BIAS_R_MASK,
sgtl5000->micbias_resistor << SGTL5000_BIAS_R_SHIFT);
break;
case SND_SOC_DAPM_PRE_PMD:
@@ -1326,7 +1336,16 @@ static int sgtl5000_probe(struct snd_soc_codec *codec) SGTL5000_HP_ZCD_EN | SGTL5000_ADC_ZCD_EN);
- snd_soc_write(codec, SGTL5000_CHIP_MIC_CTRL, 2);
switch (sgtl5000->micbias_resistor) {
case SGTL5000_MICBIAS_2K:
case SGTL5000_MICBIAS_4K:
case SGTL5000_MICBIAS_8K:
snd_soc_update_bits(codec, SGTL5000_CHIP_MIC_CTRL,
SGTL5000_BIAS_R_MASK,
sgtl5000->micbias_resistor << SGTL5000_BIAS_R_SHIFT);
default:
break;
}
/*
- disable DAP
@@ -1418,6 +1437,8 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, struct sgtl5000_priv *sgtl5000; int ret, reg, rev; unsigned int mclk;
struct device_node *np = client->dev.of_node;
u32 value;
sgtl5000 = devm_kzalloc(&client->dev, sizeof(struct sgtl5000_priv), GFP_KERNEL);
@@ -1470,6 +1491,37 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, dev_info(&client->dev, "sgtl5000 revision 0x%x\n", rev); sgtl5000->revision = rev;
if (np) {
if (!of_property_read_u32(np,
"sgtl5000-micbias-resistor", &value)) {
switch (value) {
case 0:
sgtl5000->micbias_resistor =
SGTL5000_MICBIAS_OFF;
break;
case 1:
sgtl5000->micbias_resistor =
SGTL5000_MICBIAS_2K;
break;
case 2:
sgtl5000->micbias_resistor =
SGTL5000_MICBIAS_4K;
break;
case 3:
sgtl5000->micbias_resistor =
SGTL5000_MICBIAS_8K;
break;
default:
sgtl5000->micbias_resistor =
SGTL5000_MICBIAS_4K;
dev_err(&client->dev,
"Unsuitable MicBias resistor\n");
}
} else {
sgtl5000->micbias_resistor = SGTL5000_MICBIAS_4K;
}
}
i2c_set_clientdata(client, sgtl5000);
/* Ensure sgtl5000 will start with sane register values */
-- 2.1.1
-- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html