From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com
We have snd_soc_dai/dai_stream/component_active() macro This patch uses it.
Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com --- v1 -> v2 - adjust to latest patch-set
sound/soc/fsl/fsl_esai.c | 2 +- sound/soc/fsl/fsl_spdif.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c index 84290be778f0..edcf4036697c 100644 --- a/sound/soc/fsl/fsl_esai.c +++ b/sound/soc/fsl/fsl_esai.c @@ -488,7 +488,7 @@ static int fsl_esai_startup(struct snd_pcm_substream *substream, { struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
- if (!dai->active) { + if (!snd_soc_dai_active(dai)) { /* Set synchronous mode */ regmap_update_bits(esai_priv->regmap, REG_ESAI_SAICR, ESAI_SAICR_SYNC, esai_priv->synchronous ? diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c index c711d2d93280..1b2e516f9162 100644 --- a/sound/soc/fsl/fsl_spdif.c +++ b/sound/soc/fsl/fsl_spdif.c @@ -466,7 +466,7 @@ static int fsl_spdif_startup(struct snd_pcm_substream *substream, int ret;
/* Reset module and interrupts only for first initialization */ - if (!cpu_dai->active) { + if (!snd_soc_dai_active(cpu_dai)) { ret = clk_prepare_enable(spdif_priv->coreclk); if (ret) { dev_err(&pdev->dev, "failed to enable core clock\n"); @@ -554,7 +554,7 @@ static void fsl_spdif_shutdown(struct snd_pcm_substream *substream, regmap_update_bits(regmap, REG_SPDIF_SCR, mask, scr);
/* Power down SPDIF module only if tx&rx are both inactive */ - if (!cpu_dai->active) { + if (!snd_soc_dai_active(cpu_dai)) { spdif_intr_status_clear(spdif_priv); regmap_update_bits(regmap, REG_SPDIF_SCR, SCR_LOW_POWER, SCR_LOW_POWER);