Now the audio bindings have their own binding document update the main MFD document to point to that file and remove the audio binding documentation.
Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com --- Documentation/devicetree/bindings/mfd/arizona.txt | 40 +---------------------- 1 file changed, 1 insertion(+), 39 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index b37bdde5cfda..bdd017686ea5 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -65,45 +65,6 @@ Optional properties: a value that is out of range for a 16 bit register then the chip default will be used. If present exactly five values must be specified.
- - wlf,inmode : A list of INn_MODE register values, where n is the number - of input signals. Valid values are 0 (Differential), 1 (Single-ended) and - 2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default. - If present, values must be specified less than or equal to the number of - input signals. If values less than the number of input signals, elements - that have not been specified are set to 0 by default. Entries are: - <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997) - <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814) - - wlf,out-mono : A list of boolean values indicating whether each output is - mono or stereo. Position within the list indicates the output affected - (eg. First entry in the list corresponds to output 1). A non-zero value - indicates a mono output. If present, the number of values should be less - than or equal to the number of outputs, if less values are supplied the - additional outputs will be treated as stereo. - - - wlf,dmic-ref : DMIC reference voltage source for each input, can be - selected from either MICVDD or one of the MICBIAS's, defines - (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If - present, the number of values should be less than or equal to the - number of inputs, unspecified inputs will use the chip default. - - - wlf,max-channels-clocked : The maximum number of channels to be clocked on - each AIF, useful for I2S systems with multiple data lines being mastered. - Specify one cell for each AIF to be configured, specify zero for AIFs that - should be handled normally. - If present, number of cells must be less than or equal to the number of - AIFs. If less than the number of AIFs, for cells that have not been - specified the corresponding AIFs will be treated as default setting. - - - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6). - See the datasheet for values. - The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, - wm8998, wm1814) - - - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6). - See the datasheet for values. - The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, - wm8998, wm1814) - - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if they are being externally supplied. As covered in Documentation/devicetree/bindings/regulator/regulator.txt @@ -112,6 +73,7 @@ Optional properties: Also see child specific device properties: Regulator - ../regulator/arizona-regulator.txt Extcon - ../extcon/extcon-arizona.txt + Sound - ../sound/arizona.txt
Example: