On Mon, 06 May 2024 09:44:05 +0200, Xu, Baojun wrote:
Hi Andy
Thanks for your comments, answer in line:
From: Andy Shevchenko andriy.shevchenko@linux.intel.com Sent: 02 May 2024 18:22 To: Xu, Baojun Cc: tiwai@suse.de; robh+dt@kernel.org; lgirdwood@gmail.com; perex@perex.cz; pierre-louis.bossart@linux.intel.com; Lu, Kevin; Ding, Shenghao; Navada Kanyana, Mukund; 13916275206@139.com; P O, Vijeth; Holalu Yogendra, Niranjan; alsa-devel@alsa-project.org; linux-kernel@vger.kernel.org; liam.r.girdwood@intel.com; yung-chuan.liao@linux.intel.com; broonie@kernel.org; soyer@irl.hu Subject: Re: [EXTERNAL] Re: [PATCH v3 1/3] ALSA: hda/tas2781: Modification for add tas2781 driver for SPI
On Thu, Apr 25, 2024 at 07: 54: 41AM +0000, Xu, Baojun wrote: > > From: Andy Shevchenko <andriy. shevchenko@ linux. intel. com> > > Sent: 18 April 2024 19: 56 > > On Thu, Apr 18, 2024 at 12: 02: 37PM +0800, Baojun Xu wrote: ZjQcmQRYFpfptBannerStart This message was sent from outside of Texas Instruments. Do not click links or open attachments unless you recognize the source of this email and know the content is safe. If you wish to report this message to IT Security, please forward the message as an attachment to phishing@list.ti.com
ZjQcmQRYFpfptBannerEnd
On Thu, Apr 25, 2024 at 07:54:41AM +0000, Xu, Baojun wrote:
From: Andy Shevchenko andriy.shevchenko@linux.intel.com Sent: 18 April 2024 19:56 On Thu, Apr 18, 2024 at 12: 02: 37PM +0800, Baojun Xu wrote: On Thu, Apr 18, 2024 at 12:02:37PM +0800, Baojun Xu wrote:
...
sound/pci/hda/Kconfig | 15 +++++++++++++++ sound/pci/hda/Makefile | 2 ++
Is this correct? You are adding a dead "code", isn't it?
What's mean "dead code"? After add CONFIG_SND_HDA_SCODEC_TAS2781_SPI=m in my config file, the whole patch code has worked.
Is that file already in the repository? If not, I don't see it in this patch either --> dead code.
When I integrated CONFIG_SND_HDA_SCODEC_TAS2781_SPI and compiled the whole kernel, it used to popup the following message for TAS2781 SPI module in first compile:
Build TAS2781 HD-audio side codec support for SPI Bus (SND_HDA_SCODEC_TAS2781_SPI) [N/m/?] (NEW)
Normally, selected m. And TAS2781 SPI module would be compiled.
At each patch / commit, the build must be kept successful. In your case, in the patch 1, you introduced the new driver stuff to Kconfig and Makefile while there is no actual code for that yet (which will be added in later patches). This breaks the build at this commit (lacking tas2781_hda_spi.c and co), and it's not acceptable.
You have to split patches in sensible manners; those to be logically split, and yet they must not break builds.
thanks,
Takashi