On Fri, August 1, 2014 8:04 pm, Raymond Yau wrote:
alsa-info:
retask and apply http://boosthardware.com/alsa-info1.txt
store and reboot http://boosthardware.com/alsa-info2.txt
Any reason to use asus-mode4 and hda-jack-retask at the same time ?
I had it in place because at one point it seemed to allow PA to have addition profiles other than stereo. However the line below seems to be a better combination.
Try model=auto when you use patch=,hda-jack-retask.fw
That nugget of information seems to have enabled the bass speaker in alsa after the last reboot.
/etc/modprobe.d/alsa-base.conf options snd-hda-intel model=auto patch=,hda-jack-retask.fw
Your alsa-info missing many important info , need all info from alsactl, amixer, sysfs about the driver init pins and user init pins, allay/arecord -l
http://boosthardware.com/alsa-info4.txt
No information about which Jack have been retasked
For the info file above I have the following retask assignments:
0x14 Line out (front) 0x15 Line out (center/LFE) 0x16 Line Out (Back) 0x18 Internal Speaker 0x19 Internal Speaker(Back) 0x1a Internal mic
- With the following command I can hear "rear center" through the sonic master speaker when channel 5 is testing.
speaker-test -D hw:1 -c 6 -t wav
- I do not hear any sound when rear left/right is testing.
- I do not hear any audio through the LFE with PA test on any of the audio profiles.
- I will play around with the retask assignments now that something seems to be working. Looks like I'm on the right track now.
Thanks for all your help so far.
-- Patrick Shirkey Boost Hardware Ltd