On Wed, 2010-12-22 at 10:26 +0000, Dimitris Papastamos wrote:
On Tue, 2010-12-21 at 20:38 +0000, Liam Girdwood wrote:
On Tue, 2010-12-21 at 17:16 +0000, Dimitris Papastamos wrote:
The WM8995 is a digital audio hub CODEC designed for smartphones. The current driver supports most of the basic functionality of the WM8995.
Signed-off-by: Dimitris Papastamos dp@opensource.wolfsonmicro.com
+static int wm8995_volatile(unsigned int reg) +{
- if (reg >= WM8995_MAX_REGISTER + 1)
return 1;return -EINVAL here.
The logic behind this is that out of bounds registers are considered volatile.
It does look a little odd since out of bounds generally means invalid.
If I change it to -EINVAL, the behaviour will essentially be the same because in the soc-cache code we use snd_soc_codec_volatile_register() and we only test it for being non-zero. We either need clearer semantics for this function or otherwise it should be fine.
Clearer comments are probably better in this case since it does look wrong, however if you have time please feel free to update the function semantics.
- switch (reg) {
- case WM8995_SOFTWARE_RESET:
- case WM8995_DC_SERVO_READBACK_0:
- case WM8995_INTERRUPT_STATUS_1:
- case WM8995_INTERRUPT_STATUS_2:
- case WM8995_INTERRUPT_STATUS_1_MASK:
- case WM8995_INTERRUPT_STATUS_2_MASK:
- case WM8995_INTERRUPT_CONTROL:
- case WM8995_ACCESSORY_DETECT_MODE1:
- case WM8995_ACCESSORY_DETECT_MODE2:
- case WM8995_HEADPHONE_DETECT1:
- case WM8995_HEADPHONE_DETECT2:
return 1;- }
- return 0;
+}
+/*
- R1 (0x01) - Power Management (1)
- */
+#define WM8995_MICB2_ENA 0x0200 /* MICB2_ENA */ +#define WM8995_MICB2_ENA_MASK 0x0200 /* MICB2_ENA */ +#define WM8995_MICB2_ENA_SHIFT 9 /* MICB2_ENA */ +#define WM8995_MICB2_ENA_WIDTH 1 /* MICB2_ENA */ +#define WM8995_MICB1_ENA 0x0100 /* MICB1_ENA */ +#define WM8995_MICB1_ENA_MASK 0x0100 /* MICB1_ENA */ +#define WM8995_MICB1_ENA_SHIFT 8 /* MICB1_ENA */ +#define WM8995_MICB1_ENA_WIDTH 1 /* MICB1_ENA */ +#define WM8995_HPOUT2L_ENA 0x0080 /* HPOUT2L_ENA */ +#define WM8995_HPOUT2L_ENA_MASK 0x0080 /* HPOUT2L_ENA */ +#define WM8995_HPOUT2L_ENA_SHIFT 7 /* HPOUT2L_ENA */ +#define WM8995_HPOUT2L_ENA_WIDTH 1 /* HPOUT2L_ENA */ +#define WM8995_HPOUT2R_ENA 0x0040 /* HPOUT2R_ENA */ +#define WM8995_HPOUT2R_ENA_MASK 0x0040 /* HPOUT2R_ENA */ +#define WM8995_HPOUT2R_ENA_SHIFT 6 /* HPOUT2R_ENA */ +#define WM8995_HPOUT2R_ENA_WIDTH 1 /* HPOUT2R_ENA */ +#define WM8995_HPOUT1L_ENA 0x0020 /* HPOUT1L_ENA */ +#define WM8995_HPOUT1L_ENA_MASK 0x0020 /* HPOUT1L_ENA */ +#define WM8995_HPOUT1L_ENA_SHIFT 5 /* HPOUT1L_ENA */ +#define WM8995_HPOUT1L_ENA_WIDTH 1 /* HPOUT1L_ENA */ +#define WM8995_HPOUT1R_ENA 0x0010 /* HPOUT1R_ENA */ +#define WM8995_HPOUT1R_ENA_MASK 0x0010 /* HPOUT1R_ENA */ +#define WM8995_HPOUT1R_ENA_SHIFT 4 /* HPOUT1R_ENA */ +#define WM8995_HPOUT1R_ENA_WIDTH 1 /* HPOUT1R_ENA */ +#define WM8995_BG_ENA 0x0001 /* BG_ENA */ +#define WM8995_BG_ENA_MASK 0x0001 /* BG_ENA */ +#define WM8995_BG_ENA_SHIFT 0 /* BG_ENA */ +#define WM8995_BG_ENA_WIDTH 1 /* BG_ENA */
It looks like all the register bits have macros but some driver functions are still using magic numbers for bits instead of the macros.
I've found one call to dc_servo_cmd() using a magic number. The dapm widgets and the kcontrols don't generally use the macros since the lines become very long.
There are also some magic numbers in configure_aif_clock, wm8995_set_dai_fmt, wm8995_hw_params. It's possible there are no macros defined for these numbers though...
Liam