The output of alsa-info.sh is available at http://pastebin.ca/451007
On 4/21/07, Tobin Davis tdavis@dsl-only.net wrote:
Could you download an run http://bulletproof.servebeer.com/alsa/scripts/alsa-info.sh , then post the resulting link? This will help determine what setup you have.
Tobin Davis
On Sat, 2007-04-21 at 14:56 +1000, Ben DiDonc wrote:
HiI have a toshiba A100 (see attached file lspci-nnv) with a ATI SB450.Sound worked fine with kernel 2.6.17 and alsa 1.0.12rc1 (ubuntu edgy).I just did a fresh install of ubuntu feisty (kernel 2.6.20, alsa1.0.14rc1) and the only mixer settings available are those of themodem, named off-hook and caller-id (see output of amixer, aplay -l ,and the rest in attached file output_feisty) I decided to upgrade alsa-driver and alsa-lib to 1.0.14rc2. afterdownloading the package, I unloaded all sound related modules(everything with "snd_" in it) in the right order and did:./configure --with-oss=yes --with-cards=hda-intel;make; sudo makeinstall; sudo modprobe snd_hda_intelA minor improvement: the mixer now shows controls for both the modemand the sound card (see output_after_upgrade_to_rc2), butunfortunately, there is still no sound coming out of those speakers(even though alsamixer shows control for PCM and the rest...). Finally, I downloaded alsa-driver-1.0.14rc3 and gave it a shot. Thistime again, only modem related settings appeared in alsamixer, and nosound card stuff (see aplay and amixer inoutput_after_upgrade_to_rc3), and no sound either. Does anyone know how to get some sound out of these speakers (giventhat it used to work with alsa1.0.12rc1...) ? Thanks for your helpBen _______________________________________________Alsa-devel mailing listAlsa-devel@alsa-project.orghttp://mailman.alsa-project.org/mailman/listinfo/alsa-devel
-- Tobin Davis tdavis@dsl-only.net