On Thu, Jun 25, 2015 at 08:54:07AM +0530, Vinod Koul wrote:
On Wed, Jun 24, 2015 at 08:21:20PM +0200, Michele Curti wrote:
There are a lot of errors about missing backend dai: [ 7.195570] Baytrail Audio Port: ASoC: no backend DAIs enabled for Baytrail Audio Port
So in this driver we use DPCM, which means that you have to route Front End to a BackEnd and then only you can open a device. Without linking to BE it will fail
Yes, when Liam wrote about that I started to try to understand how to find the right audio route/path, but I think it will take a while eheh :p
Thanks! So for now I tried to blindy launch these commands (apart for the "Speaker L" and "Speaker R" controls, not present in the rt5645 codec) and I got about a minute freeze at every boot and some new errors:
[ 2.700127] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 0 doesn't have DAPM widget!!! [ 2.700177] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 1 doesn't have DAPM widget!!! [ 2.700226] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 2 doesn't have DAPM widget!!! [ 2.700276] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 3 doesn't have DAPM widget!!! [ 2.700321] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in0_0 doesn't have DAPM widget!!! [ 2.700368] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in0_1 doesn't have DAPM widget!!! [ 2.700417] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in1_0 doesn't have DAPM widget!!! [ 2.700468] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in1_1 doesn't have DAPM widget!!!
this is unexpected, I will check on this
... [ 7.970937] intel_sst_acpi 80860F28:00: Wait timed-out condition:0x0, msg_id:0x1 fw_state 0x3 [ 7.970964] intel_sst_acpi 80860F28:00: fw returned err -16
Yes this is a problem, which FW are you using
I am expecting you should be on http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/comm...
Yes, I confirm it's the firmware I'm using, I did a diff to be sure :)
Thanks, Michele
... [ 53.538117] Baytrail Audio Port: sst: error code = -22 [ 53.541909] bytx205_rt5645 bytx205_rt5645: BUG: pcmC0D0p:0, pos = -22, buffer size = 203830, period size = 1199
This is impact of FW timeout
-- ~Vinod