Use table based setup to register the DAPM widgets and routes. This on one hand makes the code a bit cleaner and on the other hand the board level DAPM elements get registered in the card's DAPM context rather than in the CODEC's DAPM context.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/pxa/e740_wm9705.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/sound/soc/pxa/e740_wm9705.c b/sound/soc/pxa/e740_wm9705.c index 44b5c09..c29feda 100644 --- a/sound/soc/pxa/e740_wm9705.c +++ b/sound/soc/pxa/e740_wm9705.c @@ -103,11 +103,6 @@ static int e740_ac97_init(struct snd_soc_pcm_runtime *rtd) snd_soc_dapm_nc_pin(dapm, "PCBEEP"); snd_soc_dapm_nc_pin(dapm, "MIC2");
- snd_soc_dapm_new_controls(dapm, e740_dapm_widgets, - ARRAY_SIZE(e740_dapm_widgets)); - - snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map)); - return 0; }
@@ -136,6 +131,11 @@ static struct snd_soc_card e740 = { .owner = THIS_MODULE, .dai_link = e740_dai, .num_links = ARRAY_SIZE(e740_dai), + + .dapm_widgets = e740_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(e740_dapm_widgets), + .dapm_routes = audio_map, + .num_dapm_routes = ARRAY_SIZE(audio_map), };
static struct gpio e740_audio_gpios[] = {