From: Andrew Jackson Andrew.Jackson@arm.com
This patch set extends the DesignWare I2S driver to provide device tree support and fixes a couple of small faults.
Changes v3->v4 + Drop applied patches + Use combined function to prepare clock [Mark Brown] + Use managed clock resources to avoid clk_put [Mark Brown] + Read configuration prameters from hardware for both platform data and device tree [Mark Brown] + Re-order patch sequence [Mark Brown] + Change union name to avoid future collisions [Mark Brown] + Check return code from clk_set_rate [Mark Brown] + Check parametsrs read from hardware agaist array limits and add further comments [Mark Brown] + Add of_match_ptr [Mark Brown]
Changes v2->v3 + Drop applied patch + Flush FIFOs in prepare rather than hw_params [Lars-Peter Clausen]
Changes v1->v2 + Drop negative use count patch [Mark Brown] + Remove unnecessary debug print messages [Lars-Peter Clausen] + Rewrite iteration as for loop rather than do...while [Mark Brown] + Reorder patches to send fixes first [Mark Brown] + Simplify device tree code [Mark Brown] + Split device tree patch in two [Mark Brown] + Expand explanatory comment on channel configuration [Rajeev Kumar]
Arnd: I've not forgotten about updating the spear entries and will submit as a separate patch.
Andrew Jackson (5): ASoC: dwc: Prepare clock before use ASoC: dwc: Switch to managed clock resource ASoC: dwc: Read I2S block configuration from registers ASoC: dwc: Add documentation for I2S DT ASoC: dwc: Add devicetree support for Designware I2S
.../devicetree/bindings/sound/designware-i2s.txt | 31 +++ sound/soc/dwc/Kconfig | 1 + sound/soc/dwc/designware_i2s.c | 275 ++++++++++++++++---- 3 files changed, 260 insertions(+), 47 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/designware-i2s.txt