On 01 July 2020 19:24, Pierre-Louis Bossart wrote:
Fix W=1 warning, the kernel-doc syntax was probably from Doxygen?
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
So is the issue that the Kernel warning mechanism doesn't like Doxygen syntax? If so then:
Acked-by: Adam Thomson Adam.Thomson.Opensource@diasemi.com
sound/soc/codecs/da7210.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/da7210.c b/sound/soc/codecs/da7210.c index 0c99dcf242e4..2bb727dd3a20 100644 --- a/sound/soc/codecs/da7210.c +++ b/sound/soc/codecs/da7210.c @@ -971,14 +971,16 @@ static int da7210_set_dai_sysclk(struct snd_soc_dai *codec_dai,
/**
- da7210_set_dai_pll :Configure the codec PLL
- @param codec_dai : pointer to codec DAI
- @param pll_id : da7210 has only one pll, so pll_id is always zero
- @param fref : MCLK frequency, should be < 20MHz
- @param fout : FsDM value, Refer page 44 & 45 of datasheet
- @return int : Zero for success, negative error code for error
- @codec_dai: pointer to codec DAI
- @pll_id: da7210 has only one pll, so pll_id is always zero
- @source: clock source
- @fref: MCLK frequency, should be < 20MHz
- @fout: FsDM value, Refer page 44 & 45 of datasheet
- Note: Supported PLL input frequencies are 12MHz, 13MHz, 13.5MHz, 14.4MHz,
19.2MHz, 19.6MHz and 19.8MHz
*/
- Return: Zero for success, negative error code for error
static int da7210_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, int source, unsigned int fref, unsigned int fout) -- 2.25.1