From: Ranjani Sridharan ranjani.sridharan@linux.intel.com
Trace DMA is disabled by default when the DSP is in D0I3. Add a debug option to keep trace DMA enabled when the DSP is in D0I3 during S0.
Signed-off-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Signed-off-by: Keyon Jie yang.jie@linux.intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- sound/soc/sof/intel/hda-dsp.c | 35 ++++++++++++++++++++++++++++++++--- 1 file changed, 32 insertions(+), 3 deletions(-)
diff --git a/sound/soc/sof/intel/hda-dsp.c b/sound/soc/sof/intel/hda-dsp.c index ee604be715b9..14228b4931d6 100644 --- a/sound/soc/sof/intel/hda-dsp.c +++ b/sound/soc/sof/intel/hda-dsp.c @@ -15,6 +15,7 @@ * Hardware interface for generic Intel audio DSP HDA IP */
+#include <linux/module.h> #include <sound/hdaudio_ext.h> #include <sound/hda_register.h> #include "../sof-audio.h" @@ -22,6 +23,13 @@ #include "hda.h" #include "hda-ipc.h"
+static bool hda_enable_trace_D0I3_S0; +#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG) +module_param_named(enable_trace_D0I3_S0, hda_enable_trace_D0I3_S0, bool, 0444); +MODULE_PARM_DESC(enable_trace_D0I3_S0, + "SOF HDA enable trace when the DSP is in D0I3 in S0"); +#endif + /* * DSP Core control. */ @@ -399,8 +407,14 @@ static int hda_dsp_set_D0_state(struct snd_sof_dev *sdev, if (target_state->substate == SOF_HDA_DSP_PM_D0I3) { value = SOF_HDA_VS_D0I3C_I3;
- /* disable DMA trace in D0I3 */ - flags = HDA_PM_NO_DMA_TRACE; + /* + * Trace DMA is disabled by default when the DSP enters D0I3. + * But it can be kept enabled when the DSP enters D0I3 while the + * system is in S0 for debug. + */ + if (hda_enable_trace_D0I3_S0 && + sdev->system_suspend_target != SOF_SUSPEND_NONE) + flags = HDA_PM_NO_DMA_TRACE; } else { /* prevent power gating in D0I0 */ flags = HDA_PM_PPG; @@ -450,11 +464,26 @@ int hda_dsp_set_power_state(struct snd_sof_dev *sdev, { int ret = 0;
- /* Nothing to do if the DSP is already in the requested state */ + /* + * When the DSP is already in D0I3 and the target state is D0I3, + * it could be the case that the DSP is in D0I3 during S0 + * and the system is suspending to S0Ix. Therefore, + * hda_dsp_set_D0_state() must be called to disable trace DMA + * by sending the PM_GATE IPC to the FW. + */ + if (target_state->substate == SOF_HDA_DSP_PM_D0I3 && + sdev->system_suspend_target == SOF_SUSPEND_S0IX) + goto set_state; + + /* + * For all other cases, return without doing anything if + * the DSP is already in the target state. + */ if (target_state->state == sdev->dsp_power_state.state && target_state->substate == sdev->dsp_power_state.substate) return 0;
+set_state: switch (target_state->state) { case SOF_DSP_PM_D0: ret = hda_dsp_set_D0_state(sdev, target_state);