Il 03/11/2012 01:37, Raymond Yau ha scritto:
https://launchpadlibrarian.net/121871263/alsainfo.txt
do your patched driver really work with pulseaudio 2.0 if there is no headphone playback volume controls ?
Yep... behaviour is following :
if NO headphone plugged in, I can choose between stereo and 4 channel surround. With pulse I can then balance left/right and front/rear channels, and set the overall sound volume. The output selector of pulseaudio shows just "analog output".
if headset is plugged in, output audio selector shows both "analog output" and "headphone output", but no matters what I select, output of front channelsgoes to HP, and rear channels are disabled. I guess the output selector switch should work, but it doesn't and audio goes always to HP when plugged.
if independent headphone is ON, two different audio stereo streams can play using device 0 (speaker) and device 2 (headphone)
Can't obviously have indep HP mode AND 2+1 channels, having just 2 volume controls. Maybe it would be possible to have indep HP mode when selecting stereo mode output, but I don't see much use for it.
dac 0x08 cannot be shared beween headphone 0x25 and speaker 0x24
do a notebook really need independent headphone ?
When I said "shared" I meant "alternative"; channel 8 is used for HP when plugged, for front speakers when unplugged; I can't hear both together, and I think it's correct behaviour, having just 2 volume widgets inside VT1802P. Plugged HP completely disables both subwoofer and front speakers; this should be selectable by pulse output selector, but it doesn't.... Bu I guess that one is another bug.
Max