Add a reset function that toggles the reset line if available or uses the software reset command otherwise. Use this in power up to ensure the registers are in a sane state. This is useful when the driver module is reloaded, or after Kexec, warm-reboots, etc..
Signed-off-by: Andrew F. Davis afd@ti.com --- sound/soc/codecs/tlv320aic31xx.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-)
diff --git a/sound/soc/codecs/tlv320aic31xx.c b/sound/soc/codecs/tlv320aic31xx.c index b51c2777e8d1..77ae8f36a943 100644 --- a/sound/soc/codecs/tlv320aic31xx.c +++ b/sound/soc/codecs/tlv320aic31xx.c @@ -1031,6 +1031,24 @@ static int aic31xx_set_dai_sysclk(struct snd_soc_dai *codec_dai, return 0; }
+static int aic31xx_reset(struct aic31xx_priv *aic31xx) +{ + int ret = 0; + + if (aic31xx->gpio_reset) { + gpiod_set_value(aic31xx->gpio_reset, 1); + ndelay(10); /* At least 10ns */ + gpiod_set_value(aic31xx->gpio_reset, 0); + } else { + ret = regmap_write(aic31xx->regmap, AIC31XX_RESET, 1); + if (ret < 0) + dev_err(aic31xx->dev, "Could not reset device\n"); + } + mdelay(1); /* At least 1ms */ + + return ret; +} + static void aic31xx_clk_on(struct snd_soc_codec *codec) { struct aic31xx_priv *aic31xx = snd_soc_codec_get_drvdata(codec); @@ -1074,11 +1092,11 @@ static int aic31xx_power_on(struct snd_soc_codec *codec) if (ret) return ret;
- if (aic31xx->gpio_reset) { - gpiod_set_value(aic31xx->gpio_reset, 0); - udelay(100); - } regcache_cache_only(aic31xx->regmap, false); + + /* Reset device registers for a consistent power-on like state */ + aic31xx_reset(aic31xx); + ret = regcache_sync(aic31xx->regmap); if (ret) { dev_err(codec->dev,