Currently same slim channel map setup for every dai link, which is redundant. Fix this by adding a flag and conditionally setting these channel maps.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org --- sound/soc/qcom/sdm845.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c index 0adfc5708949..a1d5d96744b5 100644 --- a/sound/soc/qcom/sdm845.c +++ b/sound/soc/qcom/sdm845.c @@ -33,6 +33,7 @@ struct sdm845_snd_data { struct snd_soc_jack jack; bool jack_setup; + bool slim_port_setup; bool stream_prepared[AFE_PORT_MAX]; struct snd_soc_card *card; uint32_t pri_mi2s_clk_count; @@ -224,6 +225,7 @@ static int sdm845_dai_init(struct snd_soc_pcm_runtime *rtd) struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); struct sdm845_snd_data *pdata = snd_soc_card_get_drvdata(card); + struct snd_soc_dai_link *link = rtd->dai_link; struct snd_jack *jack; /* * Codec SLIMBUS configuration @@ -276,6 +278,10 @@ static int sdm845_dai_init(struct snd_soc_pcm_runtime *rtd) } break; case SLIMBUS_0_RX...SLIMBUS_6_TX: + /* setting up wcd multiple times for slim port is redundant */ + if (pdata->slim_port_setup || !link->no_pcm) + return 0; + for_each_rtd_codec_dais(rtd, i, codec_dai) { rval = snd_soc_dai_set_channel_map(codec_dai, ARRAY_SIZE(tx_ch), @@ -295,8 +301,10 @@ static int sdm845_dai_init(struct snd_soc_pcm_runtime *rtd) dev_warn(card->dev, "Failed to set jack: %d\n", rval); return rval; } - } + + pdata->slim_port_setup = true; + break; default: break;