Shi
One other thing
On 9/10/19 8:21 AM, Dan Murphy wrote:
Shi
On 9/6/19 2:06 AM, shifu0704@thundersoft.com wrote:
From: Frank Shi shifu0704@thundersoft.com
Subject should be
dt-bindings: ASoC: Add tas2770 smart PA dt bindings
Also Please add Rob Herring robh+dt@kernel.org for review
add tas2770 smart PA dt bindings
Signed-off-by: Frank Shi shifu0704@thundersoft.com
Documentation/devicetree/bindings/tas2770.txt | 38 +++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/tas2770.txt
diff --git a/Documentation/devicetree/bindings/tas2770.txt b/Documentation/devicetree/bindings/tas2770.txt
This binding belongs in Documentation/devicetree/bindings/sound
new file mode 100644 index 0000000..f70b310 --- /dev/null +++ b/Documentation/devicetree/bindings/tas2770.txt @@ -0,0 +1,38 @@ +Texas Instruments TAS2770 Smart PA
+The TAS2770 is a mono, digital input Class-D audio amplifier optimized for +efficiently driving high peak power into small loudspeakers. +Integrated speaker voltage and current sense provides for +real time monitoring of loudspeaker behavior.
+Required properties:
- compatible: - Should contain "ti,tas2770".
- reg: - The i2c address. Should contain <0x4c>,
<0x4d>,<0x4e>, or <0x4f>.
s/should/may
- #address-cells - Should be <1>.
- #size-cells - Should be <0>.
- ti,asi-format: - Sets TDM RX capture edge. 0->Rising; 1->Falling.
- ti,left-slot: - Sets TDM RX left time slots.
- ti,right-slot: - Sets TDM RX right time slots.
- ti,imon-slot-no:- TDM TX current sense time slot.
- ti,vmon-slot-no:- TDM TX voltage sense time slot.
+Optional properties:
- reset-gpio: Reset GPIO number of left device.
- irq-gpio: IRQ GPIO number of left device.
You might want to use
- interrupt-parent: the phandle to the interrupt controller which
provides the interrupt.
- interrupts: interrupt specification for data-ready.
Instead of irq-gpio
+Examples:
+ tas2770@4c { + compatible = "ti,tas2770"; + reg = <0x4c>;
Missing
#address-cells = <1>;
#size-cells = <0>;
+ reset-gpio = <&gpio15 1 GPIO_ACTIVE_LOW>; + irq-gpio = <&gpio16 1 GPIO_ACTIVE_LOW>; + ti,asi-format = <0>; + ti,left-slot = <0>; + ti,right-slot = <1>; + ti,imon-slot-no = <0>; + ti,vmon-slot-no = <2>; + };
Suggestion to provide the URL to the data sheet.