The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed DTS always comes with active high. Since Linux drivers were updated to handle proper flag, correct the DTS.
The change is not backwards compatible with older Linux kernel.
Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index f32b7445f7c9..25d167cb5e7f 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -788,7 +788,7 @@ swm: swm@c85 { left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; - powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrLeft"; #sound-dai-cells = <0>; @@ -796,7 +796,7 @@ left_spkr: speaker@0,3 {
right_spkr: speaker@0,4 { compatible = "sdw10217211000"; - powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>; reg = <0 4>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrRight";