hi all,
i have some issues with playback on one of my machines with different kernels, having my rme hammerfall hdsp connected via a cardbus/pci adapter card.
after some time (between a few seconds and several minutes) of flawless playback, the system completely freezes, magic sysrq keys are not functional either ... the freeze occurs with rt and non-rt kernels, with jack running with and without realtime scheduling.
i have the suspicion, that it is related to the combination of the hdsp with the cardbus controller of the adapter card ...
the interesting part of lspci is: 06:01.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01) Subsystem: ENE Technology Inc CB1410 Cardbus Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fb600000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: c4000000-c7fff000 (prefetchable) Memory window 1: c8000000-cbfff000 I/O window 0: 0000e000-0000e0ff I/O window 1: 0000e400-0000e4ff BridgeCtl: Parity+ SERR+ ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket
07:00.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall DSP (rev 0f) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 255 Interrupt: pin A routed to IRQ 17 Region 0: Memory at c8000000 (32-bit, non-prefetchable) [size=64K] Kernel driver in use: RME Hammerfall DSP Kernel modules: snd-hdsp
the irq 17 is used by these two devices only. i am not sure, how to proceed debugging this, since i cannot get any useful debugging information ...
thnx, tim