On Wed, 2020-08-19 at 08:55 +0200, Christoph Hellwig wrote:
Switch the 53c700 driver to only use non-coherent descriptor memory if it really has to because dma_alloc_coherent fails. This doesn't matter for any of the platforms it runs on currently, but that will change soon.
To help with this two new helpers to transfer ownership to and from the device are added that abstract the syncing of the non-coherent memory. The two current bidirectional cases are mapped to transfers to the device, as that appears to what they are used for. Note that for parisc, which is the only architecture this driver needs to use non-coherent memory on, the direction argument of dma_cache_sync is ignored, so this will not change behavior in any way.
I think this looks mostly OK, except for one misnamed parameter below. Unfortunately, the last non-coherent parisc was the 700 series and I no longer own a box, so I can't test that part of it (I can fire up the C360 to test it on a coherent arch).
[...]
diff --git a/drivers/scsi/53c700.h b/drivers/scsi/53c700.h index 05fe439b66afe5..0f545b05fe611d 100644 --- a/drivers/scsi/53c700.h +++ b/drivers/scsi/53c700.h @@ -209,6 +209,7 @@ struct NCR_700_Host_Parameters { #endif __u32 chip710:1; /* set if really a 710 not 700 */ __u32 burst_length:4; /* set to 0 to disable 710 bursting */
- __u32 noncoherent:1; /* needs to use non-
coherent DMA */
/* NOTHING BELOW HERE NEEDS ALTERING */ __u32 fast:1; /* if we can alter the SCSI bus clock @@ -429,7 +430,7 @@ struct NCR_700_Host_Parameters { for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \ __u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]) + da; \ (script)[A_##symbol##_used[i]] = bS_to_host(val); \
dma_cache_sync((dev),&(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \
dma_sync_to_dev((dev),&(script)[A_##symbol##_used[i]], 4); \ DEBUG((" script, patching %s at %d to %pad\n", \ #symbol, A_##symbol##_used[i], &da)); \ } \ @@ -441,7 +442,7 @@ struct NCR_700_Host_Parameters { dma_addr_t da = value; \ for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \ (script)[A_##symbol##_used[i]] = bS_to_host(da); \
dma_cache_sync((dev),&(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \
dma_sync_to_dev((dev),&(script)[A_##symbol##_used[i]], 4); \ DEBUG((" script, patching %s at %d to %pad\n", \ #symbol, A_##symbol##_used[i], &da)); \ } \ @@ -456,7 +457,7 @@ struct NCR_700_Host_Parameters { val &= 0xff00ffff; \ val |= ((value) & 0xff) << 16; \ (script)[A_##symbol##_used[i]] = bS_to_host(val); \
dma_cache_sync((dev),&(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \
dma_sync_to_dev((dev),&(script)[A_##symbol##_used[i]], 4); \ DEBUG((" script, patching ID field %s at %d to 0x%x\n", \ #symbol, A_##symbol##_used[i], val)); \ } \ @@ -470,7 +471,7 @@ struct NCR_700_Host_Parameters { val &= 0xffff0000; \ val |= ((value) & 0xffff); \ (script)[A_##symbol##_used[i]] = bS_to_host(val); \
dma_cache_sync((dev),&(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \
dma_sync_to_dev((dev),&(script)[A_##symbol##_used[i]], 4); \ DEBUG((" script, patching short field %s at %d to 0x%x\n", \ #symbol, A_##symbol##_used[i], val)); \ } \
These macro arguments need updating. Since you changed the input from hostdata->dev to hostdata, leaving the macro argument as dev is simply misleading. It needs to become hostdata or h.
James