Implement SPI support for WM8510, cut'n'pasting from the support for WM8731 contributed by Cliff Cai and Alan Horstmann since the wire format is the same for both codecs.
Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- sound/soc/codecs/wm8510.c | 70 +++++++++++++++++++++++++++++++++++++++++++- sound/soc/codecs/wm8510.h | 1 + 2 files changed, 69 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c index 9a37c8d..16768a5 100644 --- a/sound/soc/codecs/wm8510.c +++ b/sound/soc/codecs/wm8510.c @@ -18,6 +18,7 @@ #include <linux/pm.h> #include <linux/i2c.h> #include <linux/platform_device.h> +#include <linux/spi/spi.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> @@ -747,6 +748,62 @@ err_driver: } #endif
+#if defined(CONFIG_SPI_MASTER) +static int __devinit wm8510_spi_probe(struct spi_device *spi) +{ + struct snd_soc_device *socdev = wm8510_socdev; + struct snd_soc_codec *codec = socdev->codec; + int ret; + + codec->control_data = spi; + + ret = wm8510_init(socdev); + if (ret < 0) + dev_err(&spi->dev, "failed to initialise WM8510\n"); + + return ret; +} + +static int __devexit wm8510_spi_remove(struct spi_device *spi) +{ + return 0; +} + +static struct spi_driver wm8510_spi_driver = { + .driver = { + .name = "wm8510", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = wm8510_spi_probe, + .remove = __devexit_p(wm8510_spi_remove), +}; + +static int wm8510_spi_write(struct spi_device *spi, const char *data, int len) +{ + struct spi_transfer t; + struct spi_message m; + u8 msg[2]; + + if (len <= 0) + return 0; + + msg[0] = data[0]; + msg[1] = data[1]; + + spi_message_init(&m); + memset(&t, 0, (sizeof t)); + + t.tx_buf = &msg[0]; + t.len = len; + + spi_message_add_tail(&t, &m); + spi_sync(spi, &m); + + return len; +} +#endif /* CONFIG_SPI_MASTER */ + static int wm8510_probe(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); @@ -772,8 +829,14 @@ static int wm8510_probe(struct platform_device *pdev) codec->hw_write = (hw_write_t)i2c_master_send; ret = wm8510_add_i2c_device(pdev, setup); } -#else - /* Add other interfaces here */ +#endif +#if defined(CONFIG_SPI_MASTER) + if (setup->spi) { + codec->hw_write = (hw_write_t)wm8510_spi_write; + ret = spi_register_driver(&wm8510_spi_driver); + if (ret != 0) + printk(KERN_ERR "can't add spi driver"); + } #endif
if (ret != 0) @@ -796,6 +859,9 @@ static int wm8510_remove(struct platform_device *pdev) i2c_unregister_device(codec->control_data); i2c_del_driver(&wm8510_i2c_driver); #endif +#if defined(CONFIG_SPI_MASTER) + spi_unregister_driver(&wm8510_spi_driver); +#endif kfree(codec);
return 0; diff --git a/sound/soc/codecs/wm8510.h b/sound/soc/codecs/wm8510.h index c536839..bdefcf5 100644 --- a/sound/soc/codecs/wm8510.h +++ b/sound/soc/codecs/wm8510.h @@ -94,6 +94,7 @@ #define WM8510_MCLKDIV_12 (7 << 5)
struct wm8510_setup_data { + int spi; int i2c_bus; unsigned short i2c_address; };